Auto Magic Bug Remover - 620 is a specially formulated cleaning solution designed to effectively remove bug splatter, bird droppings, and other organic contaminants from various automotive surfaces. This powerful yet gentle cleaner works by dissolving and lifting stubborn residues, making it easier to wipe or wash away, leaving your vehicle's paint, glass, headlights and chrome surfaces clean and spot-free. Auto Magic Bug Remover - 620 is a must-have product for professional car detailers and car enthusiasts who want to maintain their vehicle's appearance. VOC compliant and body shop safe.
Primary Uses:
- Removing bug splatter and bird droppings from automotive paint, glass, and chrome surfaces
- Cleaning organic contaminants from grilles, headlights, mirrors, and other exterior surfaces
Alternate Uses:
- Cleaning bug splatter and other organic residues from motorcycles, boats, and RVs
Auto Magic Bug Remover - 620 offers the following advantages over other bug-removal products:
- Specially formulated to effectively dissolve and lift stubborn organic residues
- Safe for use on various automotive surfaces, including paint, glass, and chrome
- Easy to apply and rinse off without causing damage to surfaces
- Gentle on surfaces while providing powerful cleaning action
Neutralizing Auto Magic Bug Remover:
- To neutralize after use, simply rinse the treated area thoroughly with water. This will ensure complete removal of the product, leaving the surface clean and residue-free.
Directions for Use:
- Park the vehicle in a shaded, well-ventilated area, and ensure the surfaces to be treated are cool to the touch
- Dilute Auto Magic Bug Remover - 620 according to the recommended dilution ratio (see below)
- Spray the diluted product directly onto the affected areas, ensure the surfaces are still wet
- Allow the product to dwell for 2-3 minutes to dissolve and lift bug splatter and other residues. Do not let the product dry on the surface
- Gently agitate the area with a microfiber cloth or a soft-bristle brush to help loosen stubborn residues
- Rinse the treated area thoroughly with water to remove the product and neutralize the surface
- Repeat the process as necessary for heavily soiled areas or stubborn stains
Finish and Residues:
- Auto Magic Bug Remover - 620 leaves surfaces clean and residue-free, restoring the original appearance of the treated areas without causing damage or leaving behind any sticky or oily residues.
Best Practices:
- Make sure surfaces are cool and wet prior to applying
- Do not apply to a hot surface
- Test the product on an inconspicuous area before applying it to the entire surface
- Do not use on hot surfaces or under direct sunlight, as this may cause the product to dry too quickly and leave residues
- Use separate microfiber cloths or brushes for different surfaces to avoid cross-contamination
Dilution Ratios:
- For general bug removal, dilute Auto Magic Bug Remover - 620 at a ratio of 1:3 (1 part product to 3 parts water).
- For heavily soiled areas or stubborn stains, use the product at full strength or dilute at a ratio of 1:1 (1 part product to 1 part water).
SCENT: Citrus
Safety Information:
- Always read and follow the label instructions and safety information
- Keep out of reach of children and pets
- Wear appropriate personal protective equipment (gloves, eye protection) during application
- Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
