P&S No Rub Aerosol Coating - 16 oz Aerosol

P&S No Rub Aerosol Coating #L450 is a high-performance, easy-to-use aerosol dressing designed for professional detailers and enthusiasts seeking an efficient way to protect and enhance a wide range of surfaces. Developed to restore vibrancy and prevent premature aging, this versatile formula works exceptionally well on interior panels, exterior trim, bumpers, tires, and plastic components. With its non-greasy, satin finish, No Rub revitalizes dull and weathered surfaces, restoring a rich, factory-fresh appearance without the heavy gloss or artificial look left behind by some competitors.

This unscented, VOC-compliant aerosol solution allows for consistent coverage and even distribution with minimal effort. Its quick-drying formula eliminates the need for rubbing or buffing on most surfaces, making it ideal for high-throughput detailing environments where speed and efficiency are critical. The formula penetrates into the surface, conditioning materials to resist UV damage, drying, fading, and cracking. Whether you're working on daily drivers, show cars, or fleet vehicles, this product provides a fast, reliable finish that boosts both visual appeal and long-term durability.

Perfect for quick touch-ups or full vehicle details, P&S No Rub is an essential addition to any professional’s arsenal. It’s VOC compliant in all 50 states and contains no overpowering fragrance, making it suitable for use in enclosed spaces or around sensitive individuals.

Step-by-Step Application

1. Clean First: Make sure the surface is clean and completely dry.
2. Shake Well: Shake the can thoroughly before each use to mix contents.
3. Spray Evenly: Hold the can 6–8 inches from the surface and spray in light, sweeping motions.
4. Allow to Dry: Let the coating dry for a few minutes. No rubbing or wiping is needed unless desired.
5. Optional Buffing: For a softer finish, lightly buff with a microfiber towel after drying.

Best Practices

• Apply in a well-ventilated area to avoid inhalation of aerosol.
• Use painter’s tape or cloths to mask adjacent surfaces if overspray is a concern.
• Apply multiple light coats rather than a heavy coat for best appearance and control.
• Avoid direct sunlight or hot surfaces during application.

Why Use This Over Competing Products?

• Convenience: Aerosol delivery provides an even coat with minimal effort—no towels or applicators required.
• Efficiency: Quick drying and no-rub formula cuts down application time.
• Satin Finish: Leaves behind a clean, factory-like finish without excessive shine or residue.
• Versatility: Works on a wide range of interior and exterior surfaces, including plastics and rubber.

Longevity After Application

• Under normal conditions, P&S No Rub Aerosol Coating lasts for several weeks on both interior and exterior surfaces. Longevity depends on environmental exposure, UV intensity, frequency of washes, and surface preparation. Regular maintenance and reapplication extend the life of the protective finish.

Finish and Residues

• Finish: Satin, non-greasy appearance
• Residue: Leaves no white film, sticky residue, or streaking when applied correctly
• Touch: Dry to the touch once cured, does not attract dust or dirt

Fragrance

• : Unscented for a neutral application experience—ideal for sensitive environments and interior work

Key Features

• No-Rub, Quick-Drying Formula – Spray and go with no wiping or buffing needed.
• Unscented and VOC Compliant – Safe, neutral, and legal in all 50 states.
• Professional-Grade Durability – Helps prevent fading, cracking, and drying with long-lasting protection.
• Multi-Surface Compatibility – Effective on tires, trim, bumpers, dashboards, and interior plastics.

Additional Features

• Uniform aerosol spray pattern for smooth coverage
• Compatible with both interior and exterior applications
• Dries in minutes, saving time on high-volume jobs

Primary Uses

• Interior plastics and vinyl surfaces
• Door panels, consoles, dashboards
• Exterior plastic trim and bumpers
• Tire sidewalls

Secondary Uses

• Under-hood plastics and hoses
• Wheel well liners
• Step boards or plastic running boards (non-slip areas should be avoided)

Benefits Over Competing Products

• Saves time with fast-drying, no-rub application
• Leaves a non-oily finish—great for customers who dislike high-gloss
• No artificial scent—ideal for customers sensitive to fragrances
• Designed for professional-grade results with consumer-level ease

Specifications

• Container Size: 10oz aerosol
• Finish: Satin
• Scent: None (unscented)
• VOC Compliant: Yes – all 50 states
• Dry Time: Minutes
• Application: Aerosol spray
• Formula Type: Solvent-based, non-greasy

Applications

• Shake and spray directly from the can
• Use on clean, dry surfaces
• For best results, apply in controlled indoor environments or shaded outdoor areas

Safety Information

• Extremely flammable—do not use near open flame or heat source
• Avoid contact with skin, eyes, and inhalation of vapor
• Do not puncture or incinerate can
• Do not apply to vehicle control surfaces (steering wheel, pedals)
• Do NOT apply to steering wheels, brake pedals, accelerator pedals, or clutch pedals.
• Use in well-ventilated areas and avoid prolonged inhalation of vapors.
• Keep away from open flames, sparks, or hot surfaces—product is extremely flammable.
• Store in a cool, dry location below 120°F and out of direct sunlight.
• Keep away from children. For professional use only.

What’s Included

• (1) 10oz aerosol can of P&S No Rub Aerosol Coating (#L450)

Compatible Liquids

• No dilution required
• Compatible with most solvent-safe surface prep cleaners (before application)

Incompatible Liquids

• Do not apply over water-based dressings or surfaces recently cleaned with ammonia or alcohol-based products
• Not suitable for use on glass, painted body panels, or fabric

Terms to Know

• Satin Finish: A smooth, low-sheen appearance that mimics factory trim
• VOC Compliant: Meets emissions standards for all U.S. states
• Aerosol Coating: Pressurized spray that evenly distributes product
• No Rub: Requires no wiping or buffing after application

P&S No Rub Aerosol Coating is the ultimate time-saving solution for achieving a clean, factory-fresh look across both interior and exterior surfaces. Ideal for high-efficiency detailers or DIY users alike, this versatile aerosol dressing gets the job done fast—without the mess, scent, or residue. Stock up now and experience the difference in speed and finish.