← Back to product

Question: I have a leveling kit along with 265x70x17 tires.. will there be any rubbing with these?

Asked by quinton 4/15/2018

Answer from the SharpTruck team: For this set you would need to have 1/2" clearance in the front wheel well WITH your tires turned. When your tires are fully turned is when they take up the most room in the wheel well. If there is not enough clearance we do have  offset brackets for oversized tires which move the mud flap further away from the tire which will help with the clearance issue.

SharpTruck team 4/16/2018

Question: I have a 3in lift and 33in tires (285). With the factory mud guards, they are not as side as the tires and rocks hit the truck. Are these wide enough to cover the bigger tires?

Asked by Erik 4/22/2018

Answer from the SharpTruck team: These flaps are 12" wide and will mount up to the edge of your fender. With oversized tires I would recommend an offset bracket. This will move the flap further away from the tire and you can get a little extra coverage outside of the wheel well. You can find them here, www.sharptruck.com/...universal-mud-flap-brackets. The 1" offset should be enough to make sure the tires do not rub.

SharpTruck team 4/23/2018

Question: Will they fit 2022 Toyota platinum

Asked by Alvin Christian 2/2/2022

Answer from the SharpTruck team: Yes they will

SharpTruck team 2/3/2022