P&S Tempest HD Concentrated Degreaser - Gallon

Tempest Concentrated Cleaner/Degreaser utilizes, high efficiency, biodegradable detergents and solvents for remarkable results. Tempest is a very strong degreasing/cleaning solution that completely dissolves grease and dirt. Tempest's versatility allows it to be used not only for degreasing of engines and related parts, but also may be used to clean wheels, tires and the under body carriage.

Primary Uses:

• Degreasing engines, machinery, equipment, tires, carpets, and wheels
• Removing heavy grease and grime from automotive parts and components

Alternate Uses:

• Cleaning tools and workshop equipment
• Removing tough grease and grime from industrial surfaces

P&S Tempest HD Degreaser offers several advantages over similar degreasers:

• Its highly concentrated formula provides a powerful cleaning action with minimal product usage
• The versatile nature of this product allows it to be used on various surfaces and for various applications
• It is cost-effective due to its concentrated formula, which ensures a small amount of product goes a long way

Directions for Use:

1. Determine the appropriate dilution ratio based on the level of grease or grime to be removed. (See dilution ratios below.)
2. Mix the product with water in a spray bottle, bucket, or parts washer
3. Apply the diluted solution to the surface to be cleaned, ensuring complete coverage
4. Allow the product to dwell on the surface for a few minutes, depending on the severity of the grease or grime
5. Agitate the surface with a brush or cloth to help break down and remove the grease and grime
6. Rinse the surface thoroughly with water to remove any residues
7. Dry the surface with a clean, lint-free cloth or air dry as needed

Finish and Residues:

• When used according to the recommended dilution ratios,P&S Tempest HD Degreaser leaves a clean, residue-free finish on the surface. It effectively breaks down and removes heavy grease and grime, ensuring the surface is thoroughly clean

Best Practices:

• Always test the product on a small, inconspicuous area before full application
• Do not allow the product to dry on the surface. Rinse thoroughly with water after cleaning
• Use appropriate personal protective equipment (gloves, goggles, etc.) while handling the product

Dilution Ratios:

• Dilute from 4:1 up to 20:1 depending on job

Safety Information:

• Keep out of reach of children
• Avoid contact with eyes, skin, and clothing
• In case of eye contact, rinse immediately with plenty of water for at least 15 minutes
• In case of skin contact, wash with soap and water
• If swallowed, do not induce vomiting. Seek medical attention immediately
• Refer to the product's Safety Data Sheet (SDS) for additional safety information