P&S Dynamic Dressing Concentrate - Labeled Spray Bottle - 32 oz

P&S Dynamic Dressing is a perfect product for all dressing applications. Since P&S Dynamic Dressing is so concentrated, it may be used with varying dilution ratios depending on desired performance. Dynamic diluted with water anywhere from 1:1 for a high gloss or 4:1 for a natural finish. One product for multiple applications makes product management easier. Dynamic Dressing may be used on tires, exterior trim, engine compartments, undercarriage, interior trim, leather and vinyl. 

Primary Uses:

• Restores original beauty to and protects vinyl upholstery and trim, dashboards, air vents, tires, rubber moldings, vinyl tops, hoses and more
• Providing a high-gloss, water-resistant finish on tires, trim, molding, and dashboard

Alternate Uses:

• Can be used on engine compartments and undercarriages for added shine and protection

P&S Dynamic Dressing offers several advantages over competing products:

• Silicone-based formula for added durability and water resistance
• Will not harm plastic or vinyl dashes
• Safe for engines
• Versatile application on a variety of surfaces, both exterior and interior
• High-gloss finish for an impressive appearance
• Long-lasting protection to keep surfaces looking their best

How Long Will the Product Last After Application:

• The longevity of the finish provided by P&S Dynamic Dressing depends on factors such as weather conditions, exposure to environmental elements, and vehicle usage. Regular maintenance and reapplication are recommended for maintaining optimal appearance and protection

Directions for Use:

1. Ensure the surface is clean, dry, and cool to the touch
2. Dilute P&S Dynamic Dressing according to the desired level of shine (see dilution ratios below)
3. Shake the diluted solution well before use
   • For a high gloss finish, spray directly onto the surface, then allow to dry
   • For a satin finish (less gloss), after application, wipe evenly with a clean cloth
   • For economy usage, Dynamic can be diluted up to 4:1 with water
   • For engines, spray product directly over entire engine, then allow to dry naturally

Finish and Residues:

P&S Dynamic Dressing leaves a high-gloss, water-resistant finish with no visible residues, enhancing the appearance of your vehicle's interior and exterior rubber, plastic, and vinyl surfaces

Best Practices:

• DO NOT apply to brake/accelerator pedals
• Product can be applied when the engine is still wet; just after the wash and rinse
• Be sure to let your tires dry at least 5 minutes before driving. This will help to avoid product “slinging” onto body panels.
• Test the product on an inconspicuous area before applying it to the entire vehicle
• Regularly maintain and reapply the product to maintain optimal appearance and protection
• Avoid applying the product on surfaces that may become slippery, such as pedals, steering wheels, and floor mats

Dilution Ratios:

• High gloss and Exterior use: Ready to Use or 1:1
• High to Medium Gloss on tires, exterior moldings: Dilute 2:1 (1 part product with 2 parts water)
• Medium to Low Gloss on exterior & interiors: Dilute 4:1 (1 part product with 4 parts water)

Safety Information:

• Always read and follow the label instructions and safety information
• Keep out of reach of children and pets
• Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
• Use in a well-ventilated area
• Store in a cool, dry place away from heat sources and direct sunlight
• Dispose of the container in accordance with local regulations