Modular, mid-height truck bed rack with class-leading strength and easy, drill-free installation
If you want a work-ready rack that’s just as capable on weekend adventures, the Putco Venture TEC Quick Rack 2 is the upgrade to beat. Built around Putco’s solid-core T6 aluminum TEC Skin Dual T-Slot Bed Caps and Elevated Venture TEC Cross Bars, this modular rack system turns your truck bed into a flexible vehicle storage solution for bikes, kayaks, rooftop tents, ladders, lumber, and more—while staying compatible with many inside-rail roll-up tonneau covers. It delivers best-in-class weight capacity without the bulk, so you get serious strength in a clean, modern, lightweight package
Why it stands out
- Highest-in-class strength comes from the solid-core aluminum dual TEC channel system—not flimsy clamps—so you get a rock-solid foundation for heavy gear.
- Mid-height, elevated crossbars (≈9.25" above bed rails) let you keep using your roll-up tonneau cover while carrying taller cargo like bikes or kayaks.
- Dual ¼" T-slot channels in the TEC Skin enable endless accessory mounting—load stops, tie-downs, tent mounts, bike trays, and more.
- Patented stake pocket, no-drill install makes setup quick and secure, with truck-specific hardware that avoids weak, universal clamp points
Key Features
- 1,000 lb Static / 600 lb Dynamic Capacity – Class-leading ratings for rooftop tents, ladders, tools, and adventure gear.
- Dual T-Slot, Solid-Core TEC Channels – Strong, modular tracks across the rails and bars for fast, secure accessory mounting.
- 9.25" Elevated Crossbars + Tonneau Compatibility – Carry oversized gear and still operate most inside-rail roll-up covers.
- Quick, Drill-Free Stake Pocket Installation – Patented, truck-specific mounts deliver a rigid fit in minutes.
Built for work and play
The Venture TEC Quick Rack 2 is adaptable by design. Slide the crossbars to the exact spacing you need, or remove them when you want a wide-open bed. The dual T-slot layout on the bed caps and crossbars gives you near-infinite mounting options: strap down jobsite loads during the week, then bolt on bike trays, kayak cradles, or a rooftop tent for the weekend. And because the uprights and bars sit 9.25 inches above the bed rails, you maintain full use of most inside-mount roll-up tonneau covers—no compromises on security or weather protection.
Durability you can trust: Everything is built from T6 aluminum with a powder-coated finish for long-term corrosion resistance and a sleek, OEM-plus look. Unlike universal racks that rely on clamp points, this truck-specific stake pocket system delivers superior strength with no weak links. It’s the cleanest way to get real rack performance without drilling into your truck.
Made in the USA: Designed and manufactured by Putco Inc. in Des Moines, IA.
What’s included
Mid-Height Cross Bar Rack Kit
- Pair of TEC bed rails with integrated dual T-slots
- Two Venture TEC crossbars with four uprights
- No-drill stake pocket mounting hardware
- (Huge ecosystem of optional accessories available separately: tie-downs, load stops, tent mounts, grab handles, and more)
- Contractors & trades: Lumber, ladders, pipe, job boxes, compressors
- Overlanding & travel: Rooftop tent, recovery tools, fuel/water cans
- Outdoor sports: Bikes, kayaks, SUPs, skis/snowboards, cargo baskets
- Everyday hauling: Coolers, totes, camping gear, home-improvement runs
Tonneau cover compatibility
This rack is designed to work with many inside-rail roll-up covers. Some covers allow full use, some allow limited use (you may need to remove crossbars/uprights or slide the rack forward to open the cover), some covers require rail notching around stake pockets, and some are not compatible. Use this guide to plan your setup:
Works with (inside-rail roll-up covers)
- Access: All roll-ups (Tonnosport, Literider, Vanish, Original, Lorado, Limited)
- American: EZ-Roll only (not tri-fold or hard tri-fold)
- BAK hard rolling: Revolver, Revolver X4, Revolver X2, Roll-X (not Vortrak)
- Extang: Revolution only
- Gator: SRX, SR1 Pro, SR2 roll-ups; HR1 hard roll-up (not Soft-TriFold, FX/FX3/MX, Electric, Hybrid, Tailback, Recoil, GatorTrax, SFX)
- Lund: Genesis roll-up only
- TruXedo soft roll-ups: Lo Pro, Pro X15, Edge (Deuce 2 limited; not Truxport)
- TruXedo hard rolling: Sentry CT, Sentry
- WeatherTech: Soft roll-up; Alloy fits with limited use
- Pace-Edwards Ultragroove & Explorer Rail (with T-slot side rails; note side-rail length overhangs may occur)
- Retrax XR (with T-slot rails; side-rail overhang may occur)
Fits with limited use (rack may need to slide/parts removed to operate cover)
- A.R.E.: Fusion hard fold (short M-Series bars: remove crossbars to fold; Contour/Original uprights must be removed)
- BAKFlip: G2, HD, MX4, FiberMax, F1 (similar limitations as above; not CS or Vortrak)
- Gator Hard: FX, FX3, MX (not Electric, Hybrid, Tailback, Recoil, GatorTrax, SFX soft fold)
- Lomax: Original, Stance (remove/relocate bars/uprights for folding/vertical stow)
- Rough Country: Low-profile hard fold only (not standard hard or soft fold)
- TruXedo Deuce 2: Limited (bars/uprights adjustments needed)
- UnderCover: Flex, Ultra Flex, Armor Flex (remove bars/uprights to fold; not Classic, Elite, Lux, SE)
- WeatherTech Alloy: Limited use scenarios as above
Requires tonneau rail modification (stake-pocket notches)
- Pace-Edwards: Only if side rails are notched at stake pockets (otherwise use Ultragroove/Explorer with T-slots)
- Peragon: Rails must be notched at stake pockets
- Retrax: Rails must be notched (or use XR with T-slot rails)
- Roll-N-Lock: Rails must be notched at stake pockets
Not compatible
- Advantage (all)
- American tri-fold / hard tri-fold
- DiamondBack (all)
- Extang (all except Revolution)
- Rugged Liner (all)
- Truck Covers USA (all)
- Tyger (all)
Tip: If you’re unsure about your cover, check our tonneau compatibility guide or reach out with your truck, bed length, and cover model—we’ll confirm fitment.
Specs & construction
- System type: Mid-height modular bed rack with TEC Skin Dual T-Slot bed caps
- Materials: T6 aluminum, solid-core rails, powder-coated finish
- Elevation: ≈9.25" above bed rails (crossbar height)
- Load ratings:1,000 lb static 600 lb dynamic
- Channels: Dual ¼" T-slots (rails and bars)
- Install:Patented stake pocket, no-drill, truck-specific hardware
- Adjustability: Sliding/positionable crossbars;removable when not needed
- Origin:Designed & manufactured in the USA(Putco, Des Moines, IA)
Key terms
- Static vs. dynamic load: Static is when the vehicle is parked (e.g., rooftop tent camping). Dynamic is while driving; it’s lower due to movement and forces.
- T-slot (T-channel): An aluminum track shaped like a “T” that accepts compatible bolts/nuts to mount accessories anywhere along the rail.
- Stake pocket mounts: Truck-bed corner cavities that allow secure, drill-free mounting with vehicle-specific hardware.
- Solid-core extrusion: A one-piece, non-hollow aluminum profile that resists crushing, flex, and fastener pull-out better than thin, hollow rails.
The Venture TEC Quick Rack 2 is a strong, sleek, and incredibly versatile truck rack that keeps pace with busy workweeks and ambitious weekends. With class-leading capacity, true modularity, and fast, no-drill installation, it’s a top choice for unlocking your truck’s full potential—without sacrificing your durable truck bed cover. If you’re serious about hauling smarter, this automotive accessory belongs on your build.