Questions for Truck Hardware Gatorback RAM Mud Flaps

I would recommend the 12x23 cut style for both the front and the rear of the truck. If you have wheel well liners you can use the 12x23 non cut style for the rear wheel well.

The no-drill options will work great for you. If you are not going to be doing much towing or off road driving, you can get away with the 12x26 flaps. With the heavier suspension the rear does sit a bit higher but if you tow the squat will bring the back end down lower.

If you click on the logo you like we have full truck sets created for the 2012 RAM

With the large fender flares i would not get the custom fit flaps. The full style 12x23 rectangle flaps would be your best bet. It will require some trimming of the flap for the front but it will give you the most flexibility for installation and getting the alignment you want with the flares.

Any of the 21x24 dually mud flaps will do the trick.

Here are the RAM logo plates, https://www.sharptruck.com/truck-hardware-gatorback-ram-replacement-plate

Yes, click on the style you like and there are dually flap sets created for your truck.

I think you have a 2019, those have the small splash guards on the rear. These flaps will install over of those and they do not interfere with step bars when it comes to installation.

Yes they will. Just choose the logo you like and we have full truck sets created or just the front and rear flaps.

We do have flaps for the 1 ton. Just select the logo you would like and we have full truck sets created for the truck.

This is the set you need for the dually, https://www.sharptruck.com/truck-hardware-set-gb2124rv-gb755567

Choose the logo you like and there will be a full truck set of custom fit flaps ready to install on your truck.

Yes they can. The custom fit flaps for OEM flares will work the best. You just have to access to the factory existing mounting points on the lip of the fender.

There are custom fit sets for your truck in all of the logos. Just enter in your trucks info and the site will show you the set you need.

Yes, there are two different options with that logo. Just put your trucks info in and the site will show you flaps you need. 1. https://www.sharptruck.com/gatorback-dodge-ram-laramie-longhorn-mud-flaps 2. https://www.sharptruck.com/truck-hardware-gatorback-mud-flaps-ram-laramie-longhorn-with-black-wrap

Yes they will. The flaps install inside the wheel well and will not interfere with the side steps

Yes, here are the individual plates, choose the logo you want and ensure it is the dually sized plate https://www.sharptruck.com/truck-hardware-gatorback-ram-replacement-plate

Go here and enter in your trucks information, https://www.sharptruck.com/truck-hardware-logo-mud-flaps The site will give you all the options for the truck

For the new body style Ram 1500 you will not need the notch cut out of the front flaps. Here are all the options for the truck https://www.sharptruck.com/search?q=gcr34k

You will need the set that has the front flaps cut for a truck with flares. The rear flaps work on either truck. Here is a list of the sets that are for a truck with OEM flares, https://www.sharptruck.com/search?q=gcr31f There are some sets in there for a new body style RAM HD and dually as well so do not pay attention to those.

Yes, go here, https://www.sharptruck.com/truck-hardware-logo-mud-flaps and enter in your trucks information and the site will show you the options

Here is the set with the new longhorn logo, https://www.sharptruck.com/truck-hardware-set-gcr38r-l2

If you go here and enter your vehicles information, the site will show you what you need, https://www.sharptruck.com/truck-hardware-logo-mud-flaps

Yes, enter your trucks information here, https://www.sharptruck.com/truck-hardware-logo-mud-flaps The site will show you what fits your truck