Truck Hardware Gatorback Gunmetal Ford Oval Mud Flaps - Set of 4 - Fits 2017-2022 Ford F-250/F-350

Installed gator back flaps front/rear and really set the truck off. Definitely recommended!

It was an easy install after watching the video and reviewing the instructions.  The mud flaps look great with the brackets.  Thanks, SHARPTRUCK!

First one took an hour and the second twenty minutes.   All fit great. You tube videos was great.

I had a set of heavy rubber flaps 12X18 sitting around the shop and these brackets did the trick, I'm used to bolting flaps to a piece of angle iron bolted to the truck frame pretty simple right? I still don't understand the why with all the parts and with the oddly placed holes and the slotted piece that goes inside the fender on the tire side, It seems kinda complicated but I'm not an engineer, all in all, pretty solid set up once I figured it out, the instructions recommended a specific video on utube but it said this video has been removed, I found one that was ford branded and it worked along with the instructions.

The flaps are excellent quality.  When purchasing there was no discussion on tire size and how that may impact the standard install.  I run oversized tires and wheels.  When the wheels are completely turned there is not enough space and the tire rubs on the flap if the brackets are used.  Lose the brackets.  (Front only.  Back brackets work great.) The flaps install better by using the 3 factory holes and adding a hole on the side and one to lock the flap to the fender liner.  This method resulted in a very strong mount for the flap.  Also there is a gap behind the flap between the fender liner.  Probably would be OK as is but I don't like mud and road muck getting down in there.  Especially salty winter road muck.  I filled the gap with a flexible black calc.  (Can see in the picture.)  Hopefully will prevent corrosion from built up stuff behind the flap.

Ordered the front set of 12" X 26" Flaps and Brackets for my 2020 Super Duty.  The installation took very little time compared to the rear.   Overall, everything turned out well in the end.  I did paint the brackets black so as to not have them stand out so brightly against the black flaps.  Time will tell on the durability of the flaps and brackets.

Ordered the rear set of 12" X 26" flaps and Brackets for my 2020 Super Duty.  The installation took longer than expected due to having to use the template and drill holes, cut slots, etc.  My truck also did not have the factory rear wheel well liners and I had purchased some from a different vendor.  I installed everything at the same time so drilling holes to line up the liner and the brackets took quite a bit of planning.  Overall, everything turned out well in the end.  I did paint the brackets black so as to not have them stand out so brightly against the black flaps.  Time will tell on the durability of the flaps and brackets.

Good product but expensive.  Written Instructions are not very clear.  Read the instructions and watch the youtube video before you start the install.  Good coverage with 35x12.50 tires.  Adjusted the hole positions slightly to position the flap out further to provide more coverage.

Good product but expensive.  Written Instructions are not very clear.  Read the instructions and watch the youtube video before you start the install.  Good coverage with 35x12.50 tires.  Adjusted the hole positions slightly to position the flap out further to provide more coverage.

Good product but expensive.  Written Instructions are not very clear.  Read the instructions and watch the youtube video before you start the install.  Good coverage with 35x12.50 tires.  Adjusted the hole positions slightly to position the flap out further to provide more  coverage.