Truck Hardware Gatorback Black Wrap RAM Text Dually Mud Flaps - Set of 4 - Fits 2010-2026 RAM 3500

Put these on my 2020 3500 dually. Incredible product and extremely pleased with their durability and how they hang. Painless install and easy directions! Official trademark logo was the final straw, had to have them.

These were a breeze to install and work perfectly. Dont even consider buying the rear dually flaps without them!

The mudflaps will work and look good when done. The installation of the support brackets (the smaller of the parts pictured) cannot be accomplished by a normal person without the ability to stand up and stick your head and arms up into the fenderwell. Yes this is shown on the youtube channel when they demonstrate this. The addition of a frame lift vehicle hoist should be added to the tools required list. And mention removing the wheels will also be helpful.

Great product, awesome service.

These brackets worked great! Installation is simple!

I'm very happy with the set I purchased except for one thing, the front flaps are cut a little too deep for the profile, for myself I would prefer get the longer flaps for the front if possible. I'd also like to note that the ones I've had previously, worked great. I've gotten them in a pinched position while going through rough terrain and the one tore in half instead of tearing all the wheel well trims apart so what I'm trying to say is that they aren't built too strong and tough that they tear every thing off with them if something like that was to happen, but neither are they too thin to tear for any little reason.

truck on order just opened the box looked it over LIKE what I See hope installation is spot on

Now that they are installed I am really pleased with the dually mud flaps. The quality of the material is top notch. They are made of a thick gauge rubber that has substantial weight.  I ordered the mounting brackets for the rear flaps and again the material was top-notch. The bracket and all mounting hardware was stainless steel. The only complaint...well it really isn't a complaint...more of a warning...is that putting the rear mud flaps on by yourself is a chore.
The main problem is that the mounting bracket has to be screwed on the backside of the fender lining. This requires that you reach all the way to the top of the space of the back of the fender lining to install the bracket, which has 4 bolts, 8 fender washers, 4 lock washers and 4 nuts to install. This was a very tedious process. At first I could not comprehend how I was going to get the washers and nut on the backside of the bracket due to the small space couple with having to lift my upper body with abdomen crunches all while trying to put the various washers and nuts on the bolt. I finally came up with the system of putting the fender washer, lock washer and nut on the bolt and then using masking tape to tape the washers and nut together than unscrewing the "assembly" from the bolt. At that point I had one "unit" which I could manage to screw on all together under the truck. If you have a creeper (which I didn't), especially one with an elevating head, it would make things much easier.
After getting the bracket installed you have to "interpret" the instructions for where the mounting bolts go. The drawing is not very intuitive but if you study it for awhile all becomes "clearer".
To put the bolts, fender washers, lock washers and nuts on the remaining holes would be much easier if a helper was available. I didn't have one and managed to get all on but with some more stretching and odd positioning.
BTW, the video of the installation is helpful but VERY misleading, It is much more difficult to install than the impression it gives.
The only technical problem I had was that on my 2019 RAM 3500 dually with fender flairs, one of the pre-drilled holes of the flap did not line up with the factory holes on the the fender flair. I called Sharp Truck and spoke with technical support and couldn't have been more pleased. The person who helped was very knowledgeable. He asked me to send him a couple of photos of my problems, which I did, and within 15 minutes he called me back, having spoken with the manufacturer. All I had to do was to use one of the self-tapping bolt that came with the flap (as opposed to the bracket) to secure it. (The instructions does say this but it was so hidden I didn't see it. Again, while the instructions do work but they could use more of a step-by-step approach instead of the "exploded drawing' they use.
One other issue I encountered was that the outer rear wheel must be removed to drill the holes through the fender liner. I have a right-angle drill but even it wouldn't fit. This really isn't that big a deal but it was something I didn't know before beginning the project. The video gives you the impression that this wouldn't be necessary.
In summary, I am very happy with the dually flaps and would definitely would buy them again. I just didn't realize it was going to take all day to install them. I guess I was naive. Bottom line, I love them and feel even more so because I had to really work to get them on!

Very nicely done easy to install

If you buy the gator back mud flaps you better go ahead and buy these brackets. The mud flaps are very heavy and these brackets support the mud flaps properly. They fit perfect on my 2019 Ram 3500 DRW.