Auto Magic Clay Magic - Polymer

Auto Magic Clay Magic is a high-performance detailing clay bar that effectively removes surface contaminants such as dirt, grime, overspray, and brake dust from your vehicle's paint, glass, and chrome surfaces. This non-abrasive clay bar restores the smoothness and shine of your vehicle's finish without causing damage or scratching, making it an essential tool for professional car detailers and enthusiasts alike.

Primary Uses:

• Removing embedded contaminants from paint, factory paints, clear coats, acrylics, enamels, and lacquer paints.
• It can also be used on glass, chrome, fiberglass, plastic, and many other smooth hard surfaces for contamination and paint overspray removal
• Preparing the surface for waxing, polishing, or other detailing treatments

Alternate Uses:

• Can be used on fiberglass, plastic, and other hard surfaces
• Suitable for motorcycles, boats, and RVs

Auto Magic Clay Magic offers several advantages over competing products:

• Non-abrasive formula ensures safe and effective removal of surface contaminants
• Restores a smooth and clean finish without causing damage or scratching
• Easy-to-use and provides excellent results

Product Longevity After Application:

• The longevity of Auto Magic Clay Magic depends on the level of surface contaminants and the frequency of use. Regular use of the clay bar will maintain a smooth, clean finish and extend the life of your vehicle's paint, glass, and chrome surfaces.

Step-by-Step Application Guide:

1. Thoroughly wash and dry your vehicle to remove loose dirt and debris
2. Cut the Auto Magic Clay Magic bar into smaller pieces for easier handling
3. Form Clay Magic into an oval shape
4. Apply a liberal amount of clay lubricant to a small area of the surface you're working on (AutoMagic Body Shine works great)
5. Gently glide the clay bar across the lubricated surface using a back-and-forth motion. Do not apply excessive pressure
6. Continue to work the clay bar across the surface until it glides smoothly and contaminants are removed
7. Wipe the area with a clean microfiber cloth to remove any residual lubricant and contaminants
8. Inspect the clay bar and fold it over to reveal a clean side when it becomes dirty or contaminated
9. Repeat the process until the entire vehicle has been treated
10. Follow up with your preferred wax, polish, or sealant to protect the surface
11. Store the clay bar in a clay container or plastic baggie with a light spray of lubricant.

Finsh and Residues:

• Auto Magic Clay Magic leaves a smooth, clean finish with no residue. The clay bar effectively removes embedded contaminants, leaving the surface ready for further detailing treatments

Best Practices:

• DISCARD BAR IF DROPPED ON THE GROUND - the collected dirt may add surface scratches
• Do not use clay without a clay lubricant. The lubricant helps glide the clay and loosen imbedded surface debris
• Claying your surface is extremely easy to do and takes only approx. 15 minutes to perform
• Fold the clay frequently to ensure clean clay is used
• A 100 gram clay bar can last up to 10 details depending on the contamination level
• Use on cool, dry surfaces and out of direct sunlight to ensure optimal results
• Test the clay bar on an inconspicuous area before applying it to the entire surface
• Regularly inspect and replace clay bars when they become excessively contaminated or no longer effective

Dilution Ratios:

• Auto Magic Clay Magic does not require dilution. However, it is essential to use a clay lubricant during the process to ensure safe and effective results

Safety Information:

• Always read and follow the label instructions and safety information
• Keep out of reach of children and pets
• Avoid contact with eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
• Use in a well-ventilated area
• Store the clay bar in a cool, dry place away from heat sources and direct sunlight
• Dispose of the clay bar and container in accordance with local regulations