The RealTruck BAKFlip G2 is the original hard-folding tonneau cover — the one that set the standard for the whole category. It's a hard, multi-panel folding cover that locks down flat over your truck bed to protect and hide your cargo, then folds forward against the cab whenever you need 100% bed access. Built from aircraft-grade aluminum panels with a low-profile, semi-gloss black finish, it delivers the security and weather protection of a hard cover with a clean, factory-style look — and it does it at a price that makes it one of the best values in hard folding covers.
It's an ideal upgrade for daily drivers who want their gear dry, secure, and out of sight; contractors who need to lock down tools between jobs but still want full bed access on demand; and weekend haulers who want a cover that goes on in half an hour and carries cargo on top when needed. The appeal is a rare combination: genuine hard-cover security and all-weather sealing, a folding design that never has to come off for full bed access, a 300 lb load rating for gear up top, and a 3-year warranty — all in a cover you can install yourself in your driveway. If you want the proven, budget-friendly hard fold, the G2 is the benchmark.
Key Features
- Full bed access, anytime – Fold the panels forward to the cab and secure them, and you get 100% of your bed with the cover still on — integrated struts hold it tight against the cab for a rattle-free ride
- Patented security system – A patented rail-and-clamp system with automatic slam latches locks down every panel as it closes; just shut the tailgate and slam the cover to keep gear secure and hidden
- Aircraft-grade aluminum strength – Durable solid-core panels with aircraft-grade aluminum skins add strength while keeping the cover light, with a 300 lb evenly-distributed load rating
- No-drill, clamp-on install in 30 minutes – A simple clamp-on mounting kit means no drilling and a driveway install in half an hour or less with basic hand tools
Hard-Cover Protection, Folding Convenience
The G2's defining trick is that you never choose between a covered bed and an open one. Fold it forward against the cab, secure it with the integrated buckle/strut system, and you have 100% bed access for hauling oversized cargo — with the struts holding everything tight for a rattle- and vibration-free ride. Close and slam it, and the patented rail-and-clamp system with automatic slam latches locks each panel down against the rails. The latch system is concealed under the cover, so simply locking your tailgate secures the whole bed — there's nothing exposed for someone to tamper with.
Construction is where the "hard fold that set the standard" reputation comes from. The panels are durable, solid-core with aircraft-grade aluminum skins — strong enough for a 300 lb evenly-distributed load on top, yet light enough that one person can fold and manage the cover easily. The corrosion-resistant, semi-gloss black finish resists fading, chipping, and flaking, earning ISO quality benchmarks, and its low-profile fit sits nearly flush with the bed rails for better aerodynamics and a clean, factory-style look.
Weather protection is comprehensive. Precision-fit EPDM rubber perimeter seals, rounded hinges, and an integrated water drainage system channel water and debris away to keep your bed dry in rain and snow. Most applications also feature BAK's dual-action tailgate seal. The G2 offers third-brake-light visibility on most trucks (some 8' bed applications may block it depending on cab and light height), and it's BAKBox2 compatible if you want to add BAK's under-cover toolbox. Fitment is vehicle-specific by truck, model year, and bed length, so ordering the correct part number for your application is essential.
Installation
- Difficulty: Level 1 — Simple Installation.
- Time estimate: 30 minutes or less on most applications.
- Tools required: Basic hand tools; the included mounting kit and hardware handle the rest.
- Drilling/modifications: None. The clamp-on system requires no drilling.
- Included for setup: Clamp-on mounting kit, hardware, and installation instructions.
- Important first-week step: Check all clamps and retention mechanisms for tightness after about a week of driving, and periodically thereafter — this is both good practice and a warranty condition.
Always follow the included instructions for your specific application.
What's Included
- (1) BAKFlip G2 hard folding tonneau cover (multi-panel, aircraft-grade aluminum, semi-gloss black)
- Clamp-on mounting rails and hardware kit
- Integrated struts and buckle/latch system
- Installation instructions and warranty information
Care & Maintenance
Read this carefully — BAK states that failure to follow the care and use instructions will void your warranty.
- Cleaning: Clean with mild automotive soap and water only.
- Secure when driving: The cover must be secured at all points when the vehicle is in motion — whether closed, folded, or flipped up.
- Clear before opening: The cover must be free of all foreign material, including snow and ice, before you open it — folding a snow- or ice-loaded cover can damage the panels or hinges.
- Check the clamps: Confirm all clamps and retention mechanisms are tight after a week of driving following installation, and periodically after that.
- Do not flat-tow from the rear with the cover on the vehicle.
- Seal care: Keep the EPDM seals and drainage channels clear of grit and debris so water drains properly.
Warranty
The BAKFlip G2 is backed by a 3-Year Limited Warranty from BAK Industries, supported by a US-based product expert and customer service team.
- Covered: The cover is warranted to be structurally free from defects in materials and workmanship for 3 years from the original date of purchase.
- Not covered / voids warranty: Damage from accidents, neglect, unreasonable or unforeseeable use, improper installation/service/removal, modifications, acts of God, and normal wear and tear. Failure to follow the care and use instructions above will also void the warranty.
- Original purchaser only: The warranty applies to the initial purchaser and is not transferable to a later owner. Keep your proof of purchase.
Terms to Know
- Hard folding tonneau cover: A truck bed cover made of rigid panels connected by hinges, which fold toward the cab in sections — combining hard-cover security with fold-away bed access.
- Solid-core panel: A panel with a rigid internal core sandwiched between aluminum skins, for strength and dent resistance without excess weight.
- Aircraft-grade aluminum: A high-strength aluminum alloy chosen for a high strength-to-weight ratio.
- Rail-and-clamp system: The mounting rails plus clamps that secure the cover to the bed with no drilling, and that the panels latch against when closed.
- Automatic slam latches: Latches that engage on their own as each panel closes against the rail — you just "slam" the cover to lock it.
- EPDM seals: EPDM is a durable, weather-resistant synthetic rubber used for the perimeter seals that block water and dust.
- Evenly-distributed load: A weight rating (300 lbs here) that assumes the load is spread across the cover, not concentrated in one spot.
- Low-profile / flush-mount: The cover sits nearly level with the bed rails, improving aerodynamics and giving a factory-style appearance.
- BAKBox2: BAK's under-cover truck bed toolbox accessory, compatible with the G2 (sold separately).