Hi-Tech Quick Shot Dressing - Aerosol (Body Shop Safe)

DO NOT apply to steering wheel, brake, accelerator, or clutch pedals

Hi-Tech Quick Shot Non-Silicone Aerosol Dressing - 12 oz. (18015) is an effective, non-silicone-based aerosol dressing designed to rejuvenate and protect a wide range of surfaces. It is particularly suitable for professional use in automotive body shops and paint facilities where silicone-based products are often restricted. The easy-to-use aerosol spray ensures a uniform application, providing a stunning finish to your vehicle's tires, trim, and interior components.

Primary Uses:

• Primarily used for dressing and revitalizing exterior trim, bumpers, and tires
• Alternate uses include dressing and protecting interior surfaces such as vinyl, plastic, and rubber
• Ideal for use in body shops and paint facilities where silicone-based products are restricted

Why Choose This Over Other Products:

• Non-silicone formula eliminates the risk of paint or surface contamination
• Aerosol spray ensures an even and efficient application
• Suitable for both exterior and interior surfaces
• Quick-drying formula saves time and effort during the detailing process
• Provides a durable and long-lasting finish

Longevity:

• Typically lasts up to several weeks after application, depending on environmental exposure and surface wear

Directions for Use:

1. Thoroughly clean and dry the surface to be treated before applying the dressing
2. Shake the can well before use to ensure proper mixture and distribution of the product
3. Hold the can approximately 6 to 8 inches away from the surface, ensuring even coverage
4. Apply a light and even coat of aerosol dressing to the desired surface, avoiding overspray on unintended areas
5. Allow the dressing to penetrate and dry for a few minutes
6. If necessary, buff off any excess dressing with a clean microfiber towel to achieve the desired finish

Finish and Residues:

• Hi-Tech Quick Shot Non-Silicone Aerosol Dressing provides a non-greasy, satin finish
• No visible residue should be left on the surface after proper application and buffing

Best Practices:

• Use the aerosol dressing in a well-ventilated area
• Apply multiple light coats rather than a single heavy coat for optimal results
• Protect adjacent surfaces with masking tape or a cloth to avoid overspray

Dilution Ratios:

• As an aerosol product, Hi-Tech Quick Shot Non-Silicone Aerosol Dressing does not require dilution

Safety Information:

• Use the product in a well-ventilated area to avoid inhalation of aerosol fumes
• Keep away from open flames or heat sources
• Store the aerosol can in a cool and dry place, away from direct sunlight
• Keep out of reach of children