Contaminated brake assemblies not only compromise performance but also lead to safety hazards like brake squeal, reduced braking efficiency, and premature wear. Technician’s Choice TEC99202 Brake and Parts Cleaner is specifically formulated to address these issues with an industrial-strength, chlorinated formula that quickly dissolves and removes brake fluids, oil, grease, and other contaminants from brake, clutch, and electrical assemblies.
This non-flammable, fast-evaporating cleaner is a must-have for professionals seeking superior cleaning power without the drawbacks of residues or slow dry times. TEC99202 does not contain 1,1,1-Trichloroethane, carbon tetrachloride, silicones, or petroleum distillates, making it safer for both the technician and the vehicle's sensitive components. The jet spray valve delivers a powerful, targeted stream, enabling you to wet down dust and contaminants from a safe distance before flushing them away completely. Unlike lesser brake cleaners that leave behind residue or require extensive wiping, TEC99202 evaporates rapidly and leaves cleaned parts dry and ready for reassembly or further maintenance.
Additionally, this product helps eliminate disc brake squeak and chatter by removing contaminants that cause friction irregularities. Its chlorinated formula cuts through stubborn deposits quickly, reducing shop downtime and increasing productivity. Whether you are maintaining drum or disc brake assemblies, cleaning clutch components, or flushing out electrical assemblies, TEC99202 delivers consistent, professional results. This cleaner is an essential product for any automotive detailer, mechanic, or service technician who demands reliable and effective brake maintenance solutions.
Step-by-Step Process for Application
- Preparation: Ensure the vehicle is parked in a well-ventilated area. Wear protective gloves and eye protection.
- Initial Wetting: Shake the can lightly. Spray in short bursts from 18 to 24 inches (½ meter) away to wet down dust and contaminants, minimizing airborne particles.
- Flushing Contaminants: Move closer, about 12 to 18 inches (⅓ meter) away. Spray thoroughly to flush away brake fluid, oils, grease, and debris from the assembly.
- Drying: Allow the components to air dry or wipe with a clean, lint-free cloth if necessary. No rinsing is required due to its fast evaporation.
- Post-Inspection: Confirm all contaminants have been removed and ensure parts are dry before reassembly.
Primary Uses
- Cleaning disc and drum brake assemblies
- Flushing out clutch components
- Removing oil, grease, and brake fluid from electrical assemblies
- Eliminating contaminants that contribute to disc brake squeal and chatter
Secondary Uses
- Cleaning machined parts during assembly
- Degreasing metal surfaces before painting or bonding
- Maintenance in industrial equipment repair and fleet services
Benefits Over Other Competing Products
- Fast Evaporation means no downtime waiting for parts to dry
- Non-Flammable, increasing safety during use in shops and around hot components
- No Fluorocarbons, making it an environmentally responsible choice for a chlorinated cleaner
- Jet Spray Valve for precise control, minimizing product waste and improving cleaning efficiency
- Does not contain 1,1,1-Trichloroethane, carbon tetrachloride, or silicones, reducing risks to sensitive components
- Helps eliminate disc brake noise, improving braking performance post-cleaning
How Long Will the Product Last After Application
TEC99202 leaves no residue after use, ensuring that the cleaned surfaces remain dry and contaminant-free until exposed to new environmental factors. Each 18oz aerosol can provides dozens of applications, depending on the extent of contamination and surface area being cleaned. Properly maintained brake systems that are routinely cleaned with TEC99202 will experience reduced wear, quieter operation, and improved performance over time.
Finish and Residues
TEC99202 evaporates quickly, leaving no residue or oily films behind. Cleaned components are immediately ready for inspection, further maintenance, or reassembly without additional wiping or rinsing.
Scent
As a chlorinated product, TEC99202 has a distinct industrial scent typical of chlorinated brake cleaners. Ensure proper ventilation during use to minimize inhalation exposure.
Key Features
- Fast Evaporation: Dries quickly with no residue, reducing downtime.
- Non-Flammable: Safe for use around hot components and during maintenance.
- Jet Spray Valve: Allows for precise, forceful application to dislodge contaminants effectively.
- Contains No Fluorocarbons or 1,1,1 Trichloroethane: Safer for technicians and compliant with modern regulations.
Best Practices
- Always wear gloves and eye protection when using brake cleaners.
- Do not use near open flames or in poorly ventilated areas, even though the product is non-flammable.
- Spray in short bursts to control product usage and prevent excessive pooling.
- Use a clean cloth to wipe surfaces if contaminants are heavy or for inspection post-cleaning.
- Regularly clean brake components as part of preventative maintenance to minimize noise and maximize lifespan.
Safety Information
- For professional use only.
- Use in a well-ventilated area to avoid inhaling vapors.
- Avoid contact with skin and eyes. In case of contact, rinse immediately with water.
- Do not ingest. If swallowed, seek medical attention immediately.
- Pressurized container: Do not puncture, incinerate, or expose to temperatures above 120°F (49°C).
- Keep out of reach of children.
Specifications
- Product Name: TEC Brake and Parts Cleaner - Chlorinated
- SKU: TEC99202
- Size: 18oz Aerosol
- Base: Chlorinated
- Evaporation: Fast
- Flammability: Non-Flammable
- Residue-Free: Yes
- Propellant: Non-fluorocarbon
- Spray Type: Jet Spray Valve
- VOC/OTC Compliant: Yes
- Does Not Contain: 1,1,1 Trichloroethane, carbon tetrachloride, silicones, or petroleum distillates
Applications
- Professional auto repair and maintenance shops
- Mobile mechanic services
- Fleet maintenance and heavy equipment repair
- Industrial machine maintenance
- Brake and clutch assembly cleaning
- Electrical contact cleaning (when safe for chlorinated cleaners)
Safety Precautions
- Store in cool, dry areas away from direct sunlight
- Do not use on plastic or painted surfaces without testing
- Avoid prolonged exposure to vapors; use appropriate respiratory protection if necessary
- Dispose of empty cans according to local hazardous waste regulations
What’s Included
- (1) 18oz TEC99202 Brake and Parts Cleaner Aerosol Can
- Easy-to-use jet spray valve built into each can
- Instructions for safe and effective application printed on label
Compatible Liquids
- Can be followed by dry film lubricants or brake-specific lubricants after cleaning
- Compatible with Technician’s Choice brake lubricants and anti-squeal products
Incompatible Liquids
- Do not mix or use with water-based cleaners or solvent-based degreasers without ensuring surfaces are dry
- Not compatible with rubber or plastic-safe cleaning solutions—test before use on these materials
Dilution Ratio
- Ready-to-Use: No dilution required. Use directly from the aerosol can for immediate results.
Terms to Know
- Chlorinated Cleaner: A solvent-based cleaner that uses chlorinated hydrocarbons for rapid evaporation and strong degreasing power.
- Non-Flammable: A product that will not ignite under standard conditions of use.
- VOC/OTC Compliant: Meets Volatile Organic Compound regulations required in certain jurisdictions.
- Jet Spray Valve: A precision nozzle that delivers a powerful, directed stream for flushing out contaminants.
When it comes to professional brake and parts cleaning, TEC99202 Brake and Parts Cleaner offers unmatched efficiency, safety, and reliability. With its chlorinated, fast-evaporating formula, this cleaner ensures your brake components are clean, dry, and ready for peak performance—without time-consuming disassembly or unnecessary risks. Every shop, fleet service, and mobile technician should keep TEC99202 on hand for fast, effective cleaning that meets today’s strict performance and environmental standards.