The Truck Hardware Gatorback Tremor Black Wrap Mud Flaps offset set of 4 combines serious protection with the officially licensed orange Tremor logo on a black wrap 304 stainless steel plate for 2021-2027 Ford F-150 trucks, including Tremor models, running oversized tires or small lift and leveling kits. Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is made from heavy-duty virgin rubber, mounted on custom fit 1.5" offset nylon kickback brackets for extra tire clearance, and backed by a lifetime warranty on the rubber. The result is a flap that clears bigger tires and lifted suspensions and keeps doing its job for the life of your truck.
These 12.5" wide flaps protect your truck from rocks, mud, gravel, snow and road debris, so you will see your truck staying cleaner longer, less junk on your step bars, and fewer rock chips in the paint. The officially licensed Tremor logo in vibrant orange adds a bold pop of color that shows off your truck. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- Heavy-duty 1/2" thick virgin rubber - Many aftermarket flaps use thinner, recycled rubber that can curl, sag or tear over time. Gatorbacks use thick, premium virgin rubber that resists cracking and stays strong and flexible through heat, cold, rocks and gravel for years of reliable protection.
- Officially licensed orange Tremor logo, black wrap - A Ford licensed logo die-stamped into a 304 stainless steel plate with a black wrap finish for a bold, blacked-out look that resists rust and corrosion.
- 1.5" offset kickback brackets - Nylon and fiberglass composite kickback brackets set the flaps back 1.5" for extra tire clearance, so they fit every 2021-2027 F-150 trim including Tremor and work with lift or level kits and oversized tires, with no body drilling.
- Lifetime rubber warranty - The rubber is covered for life against tears or damage under normal use, and the nylon brackets carry a 1-year warranty against manufacturing defects.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the 2021-2027 Ford F-150 come in several versions. Use this quick guide to make sure you pick the right one:
- Offset vs. standard - This is the Offset version. Its 1.5" offset nylon kickback brackets add tire clearance for trucks with oversized tires or lift and leveling kits. For a stock-height F-150 with OEM fender flares, the standard custom fit Gatorback set is also available.
- Tremor and every F-150 trim - This set fits all 2021-2027 F-150 trims, including XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor.
- Raptor and fender flares - This set does not fit the F-150 Raptor; choose the Gatorback Raptor Offset set instead. It will NOT fit trucks with aftermarket fender flares.
- Choosing a style - This version is the orange Tremor on black wrap stainless style. This Gatorback Offset set is also available in: plain rubber (no plate), black anodized aluminum plate, black anodized Ford oval, orange Tremor on black anodized aluminum, black wrap Ford oval and gunmetal Ford oval.
Features and Benefits
These flaps are made from heavy-duty, 1/2" thick virgin rubber, a high-quality rubber that has not been recycled, offering better strength, flexibility and wear resistance than reclaimed rubber. The thick rubber stays flexible, resists cracking and holds its shape while it deflects debris. The 12.5" wide flaps give you 10" of tire coverage up front and 11.25" in the rear, measured from the bottom of the fender to the bottom of the flap. A sliding channel design allows you to remove the rubber lower section for added ground clearance when needed.
The officially licensed orange Tremor logo is die-stamped into a 304 stainless steel plate finished with a hand-applied black vinyl overlay (black wrap) for a sleek, blacked-out background. The 304 stainless steel resists rust and corrosion for a long-lasting, premium appearance. The vibrant orange Tremor logo adds a bold pop of color that sets your truck apart. You will appreciate the attention to detail in these flaps.
Fit is built in. These offset flaps are custom designed for 2021-2027 Ford F-150 trucks, including XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor trims. The upper brackets are made from a nylon and fiberglass composite that resists fading and chipping while providing flexibility and UV resistance, and their 1.5" kickback adds tire clearance for oversized tires and lift or leveling kits. All included hardware is black oxide stainless steel for corrosion resistance and a cohesive look. The flaps mount to your truck's factory mounting points with no body drilling and work with step bars, power boards and side steps. Note that they will NOT fit trucks with aftermarket fender flares. Gatorback mud flaps are proudly made in Canada.
Installation
Installation is simple, with no body drilling required. The custom fit nylon kickback brackets align with your truck's factory mounting points, and the black oxide stainless steel hardware you need for a secure installation is included. Installation can be done with standard tools you already have at home. Each flap features a sliding channel, so the rubber lower section can be removed easily when you need extra ground clearance. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (2) Gatorback Tremor Black Wrap 12.5" wide front mud flaps (1 driver side, 1 passenger side)
- (2) Gatorback Tremor Black Wrap 12.5" wide rear mud flaps (1 driver side, 1 passenger side)
- Custom fit nylon kickback mounting brackets
- All necessary hardware, including black oxide stainless steel fasteners
Care & Maintenance
- Clean the rubber with mild soap and water. Avoid harsh chemicals that could degrade the material. Regular cleaning helps maintain flexibility and extends the life of the flaps.
- Rinse thoroughly and let the flaps air dry for best results.
- Wipe down the nylon brackets with a damp cloth and a mild pH-balanced soap to keep them in top condition.
- Clean the black oxide stainless steel fasteners periodically to prevent a buildup of dirt that can affect their performance.
- Clean the black wrap plates with a stainless steel cleaner and a soft cloth to maintain their polished appearance. Avoid abrasive cleaners or scrubbers that may damage the finish.
- Check the mounting hardware periodically and retighten if needed, especially after off-road or rough-road driving.
Warranty
Gatorback mud flaps are backed by a limited lifetime warranty on the rubber portion of the flap, covering tears or damage under normal use for the lifetime of the product to the original owner. If a flap is damaged due to normal wear and tear, let us know and we will send you a replacement piece of rubber at no charge. The nylon brackets include a one-year limited warranty against manufacturing defects.
Plates and mounting hardware are not covered by the warranty. The warranty also does not cover damage caused by misuse, abuse or improper installation. To start a warranty claim, please provide product photos and proof of purchase.
Terms to Know
- Virgin rubber - High-quality rubber that has not been recycled or repurposed, retaining its original strength, flexibility and durability compared to reclaimed rubber.
- No-drill installation - Mounting that uses your truck's existing factory mounting points, so no new holes are drilled and the body's original structure and finish are preserved.
- Tire coverage - How far the flap extends below the fender (10" front and 11.25" rear on this set). More coverage means more protection.
- 304 stainless steel - A premium grade of stainless steel known for excellent rust and corrosion resistance, ensuring a durable, long-lasting finish.
- Black wrap - A black vinyl overlay applied over the stainless steel plate for a blacked-out look with added durability.
- Die-stamped - The logo is pressed into the metal plate for a crisp, permanent design.
- Officially licensed - The logo is licensed by Ford, so it matches the official design.
- Offset / kickback bracket - A bracket that sets the flap back from the tire (1.5" here) for extra clearance without interference.
- Black oxide stainless steel fasteners - Stainless steel hardware treated with black oxide for increased corrosion resistance and a cohesive appearance with the flaps.
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCN408K-TROW
- Position: Offset set of 4 (front and rear, driver and passenger)
- Fitment: 2021-2027 Ford F-150, including Tremor
- Trims: XL, XLT, STX, Lariat, King Ranch, Platinum and Tremor
- Does Not Fit: F-150 Raptor (see Gatorback Raptor Offset); trucks with aftermarket fender flares
- Style: Officially licensed orange Tremor logo on black wrap 304 stainless steel plates
- Plate: Black wrap 304 stainless steel
- Flap Width: 12.5"
- Rubber: 1/2" thick heavy-duty virgin rubber
- Tire Coverage: Front 10", rear 11.25" from fender to bottom of flap
- Brackets: 1.5" offset nylon and fiberglass composite kickback brackets with sliding channel
- Hardware: Black oxide stainless steel fasteners
- Installation: No body drilling, factory mounting points
- Made In: Canada
- Warranty: Limited lifetime on the rubber; 1-year limited on nylon brackets (manufacturing defects); plates and hardware not covered