The Truck Hardware Gatorback Black Wrap RAM Text Mud Flaps set of 4 combines serious protection with the officially licensed (MOPAR) RAM text logo on a black wrap 304 stainless steel plate for 2019-2027 RAM 2500/3500 single rear wheel trucks with OEM fender flares. Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is made from heavy 1/2" thick virgin rubber, custom fit for your RAM, and backed by a lifetime warranty on the rubber. The result is a flap that hangs straight, stays put at highway speed, and keeps doing its job for the life of your truck.
These 12" wide flaps protect your RAM from rocks, mud, gravel, snow and road debris, so you will see your truck staying cleaner longer, less junk on your step bars, and fewer rock chips in the paint. The RAM text logo on a black wrap plate complements blacked-out trim, black wheels, black badges and sport appearance packages. Truck Hardware Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- Heavy-duty 1/2" thick virgin rubber - Many aftermarket flaps use thinner, recycled rubber that can curl, sag or tear over time. Gatorbacks use thick, premium virgin rubber built to withstand harsh weather, road debris and off-road conditions.
- MOPAR licensed RAM text logo - Die-stamped into a 10 1/4" x 5" black wrap 304 stainless steel plate with a black background and vinyl overlay for an authentic, factory-approved look that resists corrosion.
- Custom fit, no drilling - Made for 2019-2027 RAM 2500/3500 trucks, the flaps use factory mounting points and existing fasteners, with extra hardware included, and install in about 15 minutes per flap.
- Lifetime rubber warranty - If a flap comes off the truck or is damaged from normal wear and tear, Gatorback sends replacement rubber at no charge for as long as you own the truck.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the 2019-2027 RAM 2500 and 3500 come in several versions. Use this quick guide to make sure you pick the right one:
- With or without OEM fender flares - RAM 2500/3500 Gatorback sets come in two fits. The version marked "Fits with OEM fender trim only" is for trucks with factory fender flares, and the version marked "Does NOT fit with OEM fender trim" is for trucks without them. This set is the version for trucks WITH OEM fender flares.
- Single rear wheel only - These flaps fit single rear wheel (SRW) trucks. They do NOT fit dually (dual rear wheel) trucks.
- Oversized tires or more clearance - Running bigger tires? The Gatorback Offset set uses fiberglass-reinforced nylon brackets with a 5/8" offset and an easy track system that lets you slide the rubber out. It fits trucks with OEM fender flares and fender liners.
- Choosing a style - This version is the black wrap RAM text logo style. This standard Gatorback set for trucks with flares is also available in: RAM head logo, RAM text logo, plain rubber (no plate), polished stainless steel plate, American flag, black anodized RAM text logo, black American flag, black anodized aluminum plate, black wrap Laramie Longhorn logo, black wrap RAM head logo, gunmetal plate, gunmetal RAM head logo, gunmetal RAM text logo, Laramie Longhorn logo and horizontal RAM logo.
Features and Benefits
These flaps are constructed from 1/2" thick virgin rubber, a high-quality rubber that has not been recycled, giving greater durability and flexibility than reclaimed rubber. They are engineered to withstand harsh weather, road debris and off-road environments, and the weight of the thick rubber keeps them from sailing at highway speed. With 12" wide flaps, 9.5" of front and 9.25" of rear tire coverage, measured from the bottom of the fender to the bottom of the flap, they help reduce dirt buildup on your truck's exterior, step bars and running boards and minimize paint chipping, preserving the value and look of your truck.
The RAM text logo is officially licensed through MOPAR, ensuring authenticity and adherence to factory quality standards, and it is die-stamped into a 304 stainless steel plate finished with a hand-applied vinyl overlay for a bold black wrap appearance. Measuring 10 1/4" x 5", the plate resists corrosion and fading for a long-lasting, premium finish. You will appreciate the attention to detail in these flaps.
Fit is built in. These flaps are precision-engineered for 2019-2027 RAM 2500 and 3500 single rear wheel trucks with OEM fender flares, including RAM 2500 (Big Horn, Laramie, Limited, Limited Longhorn, Longhorn, Power Wagon, Rebel and Tradesman) and RAM 3500 (Big Horn, Laramie, Limited, Limited Longhorn, Longhorn and Tradesman) trims. They do not fit dually trucks. The flaps mount to factory mounting points and existing fasteners with no body drilling, preserving your truck's original structure and finish, and they install flush to the inside of the wheel well, so they work with step bars, power boards and side steps. Gatorback mud flaps are proudly made in Canada.
Installation
Installation is simple, with no body drilling required. The flaps use your truck's factory mounting points and existing fasteners, and if factory fasteners are not available, the additional hardware you need for a snug, secure fit is included. Each flap takes about 15 minutes to install with basic tools you already have at home, and the flaps install flush to the inside of the wheel well for a clean, professional-grade finish. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (2) Gatorback Black Wrap RAM Text 12" wide custom fit front mud flaps, part GCR31F-RTW
- (2) Gatorback Black Wrap RAM Text 12" wide custom fit rear mud flaps, part GCR38R-RTW
- Custom fit installation hardware
Care & Maintenance
- Clean the rubber regularly with a mild soap and water solution to remove dirt, mud and grime. Avoid harsh chemicals and petroleum-based cleaners, which can degrade rubber over time.
- Rinse thoroughly and let the flaps air dry. Proper care keeps the rubber flexible and extends its life.
- Clean the black wrap plates with a soft cloth and a mild soap and water solution or mild automotive cleaner. Avoid abrasive materials and harsh chemicals that could damage the vinyl overlay, and dry the plates thoroughly to prevent water spots and preserve the deep black finish.
- Check the mounting hardware periodically and retighten if needed, especially after off-road or rough-road driving.
Warranty
Gatorback mud flaps are backed by a limited lifetime warranty on the rubber portion of the flap only. This warranty covers rubber replacement (for example, tear-offs) for the lifetime of the product to the original owner. If a flap comes off the truck or is damaged due to normal wear and tear, let us know and we will send you a replacement piece of rubber at no charge.
Plates, brackets and mounting hardware are not covered by the warranty, including regular wear and tear on those parts. The warranty also does not cover damage caused by misuse, abuse or improper installation. To start a warranty claim, please provide product photos and a copy of the installation or purchase receipt.
Terms to Know
- Virgin rubber - Rubber that has not been recycled, providing greater durability and flexibility compared to reclaimed rubber.
- No-body-drill installation - An installation method that uses factory mounting points, so no holes are drilled and the truck's original structure and finish are preserved.
- Tire coverage - How far the flap extends below the fender (9.5" front and 9.25" rear). More coverage means more protection.
- SRW / dually - Single rear wheel trucks have one tire per side in the rear; dually trucks have two. These flaps fit SRW trucks only.
- 304 stainless steel - High-quality stainless steel that resists rust and corrosion, providing a long-lasting, polished finish.
- Black wrap / vinyl overlay - A durable black vinyl layer applied over the plate that adds contrast and resists fading.
- Die-stamped plate - The logo is pressed into the metal for crisp detail and long-lasting definition.
- MOPAR licensed - The logo is officially licensed by MOPAR, ensuring authenticity and adherence to factory quality standards.
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCR36K-RTW
- Position: Set of 4 (front and rear, driver and passenger)
- Fitment: 2019-2027 RAM 2500/3500 single rear wheel trucks with OEM fender flares
- Trims: RAM 2500 Big Horn, Laramie, Limited, Limited Longhorn, Longhorn, Power Wagon, Rebel and Tradesman; RAM 3500 Big Horn, Laramie, Limited, Limited Longhorn, Longhorn and Tradesman
- Does Not Fit: Trucks without OEM fender flares; dually trucks
- Style: Officially licensed RAM text logo on black wrap 304 stainless steel plates
- Plate: Black wrap 304 stainless steel, 10 1/4" x 5"
- Flap Width: 12"
- Rubber: 1/2" thick heavy-duty virgin rubber
- Tire Coverage: Front 9.5", rear 9.25" from fender to bottom of flap
- Installation: No body drilling, about 15 minutes per flap
- Made In: Canada
- Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered)