The Truck Hardware Gatorback Super Duty Mud Flaps rear pair combines serious protection with the officially licensed Super Duty logo on a 304 stainless steel plate for 2023-2027 Ford F-250 and F-350 Super Duty single rear wheel trucks. Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is almost a 1/2" thick virgin rubber, mounted with custom fit brackets made for your exact truck, and backed by a lifetime warranty on the rubber. The result is a flap that hangs straight, stays put at highway speed, and keeps doing its job for the life of your truck.
These 12" wide flaps protect your truck from rocks, mud, gravel, snow and road debris, so you will see your truck staying cleaner longer, less junk on your step bars, and fewer rock chips in the paint. The Super Duty logo is officially licensed through Ford Accessories, so it looks exactly right on your Super Duty. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, they are test fit on every model year by Ford Accessories, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- Heavy-duty 1/2" thick virgin rubber - Many aftermarket flaps use thinner, recycled rubber that can curl, sag or tear over time. Gatorbacks use thick, premium virgin rubber that stays strong and flexible through heat, cold, rocks and gravel for years of reliable protection.
- Officially licensed Super Duty logo - Licensed through Ford Accessories and die-stamped into 304 stainless steel with a hand-applied vinyl overlay for a crisp logo that resists rust and corrosion.
- Custom fit, no drilling - Custom fit brackets and hardware made for the 2023-2027 F-250 and F-350 are included, and Ford Accessories test fits the flaps on each model year, so you get a precise, factory-quality fit with no holes drilled in your truck.
- Lifetime rubber warranty - If a flap comes off the truck or is damaged from normal wear and tear, Gatorback sends replacement rubber at no charge for as long as you own the truck.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the 2023-2027 Super Duty come in several versions. Use this quick guide to make sure you pick the right one:
- Front pair, rear pair, or set of 4 - This listing is the rear pair only (2 flaps). Add a front pair for front wheel coverage, or choose a set of 4 to protect all four wheel wells.
- Single rear wheel vs. dually - This listing fits single rear wheel (SRW) trucks only. Dual rear wheel (DRW) trucks need Gatorback Dually rear flaps, which use extra-wide 21" rear flaps. The front wheels are the same on both, so front pairs fit SRW and dually trucks.
- Tremor, lifted trucks, or oversized tires - This flap does NOT fit Tremor models. For a Tremor, or a truck with a lift or level kit or oversized tires, choose Gatorback Offset mud flaps, which use 1.5" offset nylon kickback brackets for extra tire clearance and fit all models including Tremor.
- Choosing a style - This version is the Super Duty style. This rear pair is also available in: plain rubber (no plate), black Ford oval, blue Ford oval, FX4, Platinum, American flag, black American flag, black anodized aluminum plate, black wrap Ford oval, F-250, F-350, gunmetal plate, black wrap FX4, black anodized Ford oval, black anodized Super Duty and gunmetal Ford oval.
Features and Benefits
These flaps are made from heavy-duty, 1/2" thick virgin rubber, a high-quality, unrefined rubber that offers better strength, flexibility and wear resistance than recycled rubber. The weight of the thick rubber keeps the flaps from sailing at highway speed, so they stay in place and keep protecting your truck. At 12" wide with 11.5" of tire coverage from the bottom of the fender to the bottom of the flap, they catch the rocks, mud and slush your rear tires throw back toward your bumper, any trailer you are towing, and the drivers behind you.
The Super Duty logo is officially licensed through Ford Accessories, ensuring it looks perfect, and is die-stamped into a 304 stainless steel plate with a hand-applied vinyl overlay. The 304 stainless steel resists rust and corrosion, so the plate keeps its polished look in harsh weather. The plate measures 10 1/4" x 5". You will appreciate the attention to detail in these flaps.
Fit is built in. Gatorback flaps are designed specifically for the 2023-2027 Ford F-250 and F-350 Super Duty, including XL, XLT, Lariat, King Ranch, Platinum and Limited trims, and Ford Accessories test fits the flaps on each model year to confirm fitment. This rear pair fits single rear wheel trucks; dually trucks need the 21" Gatorback Dually rear flaps. They do not fit Tremor models due to tire clearance. The flaps mount to your truck's factory mounting locations with no body drilling, so your truck's body stays untouched and your resale value is protected. They also install flush to the inside of the wheel well, so they work alongside step bars, power boards and side steps without getting in the way. Gatorback mud flaps are proudly made in Canada.
Installation
Installation is simple, with no body drilling required. The flaps mount to your truck's factory existing mounting locations, and the custom fit brackets and hardware you need for a solid installation are included. Installation can be done with tools you already have at home and takes about 15 minutes per flap. The flaps install flush to the inside of the wheel well for a clean, factory look. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (2) Gatorback Super Duty 12" wide rear mud flaps (1 driver side, 1 passenger side)
- Custom fit brackets and mounting hardware for the 2023-2027 Ford F-250 and F-350
Care & Maintenance
- Clean the rubber with a mild soap and water solution. Regular cleaning helps keep the rubber flexible and extends the life of the flaps.
- Avoid harsh chemicals and petroleum-based cleaners, which can break down rubber over time.
- Rinse thoroughly and let the flaps air dry for best results.
- Clean the stainless steel plates with a soft cloth and a mild detergent cleaner, or a stainless steel cleaner and polish, to maintain their shine. Use a cleaner with a pH between 4 and 9 to prevent discoloration, avoid abrasive materials and harsh chemicals that could scratch the surface, then rinse with clean water and dry with a soft cloth.
- Gently clean the vinyl logo overlay with a soft cloth to maintain its finish and color.
- Check the mounting hardware periodically and retighten if needed, especially after off-road or rough-road driving.
Warranty
Gatorback mud flaps are backed by a limited lifetime warranty on the rubber portion of the flap only. This warranty covers rubber replacement (for example, tear-offs) for the lifetime of the product to the original owner. If a flap comes off the truck or is damaged due to normal wear and tear, let us know and we will send you a replacement piece of rubber at no charge.
Plates, brackets and mounting hardware are not covered by the warranty. The warranty also does not cover damage caused by misuse, abuse or improper installation. To start a warranty claim, please provide product photos and proof of purchase.
Terms to Know
- Virgin rubber - High-quality rubber in its original, unrefined state, which is stronger and more durable than recycled rubber.
- No-drill installation - Mounting that uses your truck's factory mounting points, so no holes are drilled in the body.
- Tire coverage - How far the flap extends below the fender (11.5" on these rear flaps). More coverage means more protection.
- Sailing - When a lightweight flap lifts and flaps at speed. The heavy 1/2" rubber keeps Gatorbacks from sailing.
- SRW / DRW - Single rear wheel and dual rear wheel (dually) trucks. This rear pair fits SRW trucks.
- 304 stainless steel - A premium grade of stainless steel known for excellent resistance to rust and corrosion, so it keeps a long-lasting, polished appearance.
- Die-stamped - The logo is pressed into the metal plate for a crisp, permanent design.
- Hand-applied vinyl overlay - Vinyl applied by hand to the stamped logo to add color and contrast.
- Officially licensed - The logo is licensed by Ford, so it matches the official design.
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCR412R-SD
- Position: Rear pair (driver and passenger)
- Fitment: 2023-2027 Ford F-250/F-350 Super Duty, single rear wheel
- Trims: XL, XLT, Lariat, King Ranch, Platinum and Limited
- Does Not Fit: Tremor (see Gatorback Offset mud flaps)
- Style: Officially licensed Super Duty logo on 304 stainless steel plates
- Plate: 304 stainless steel, 10 1/4" x 5"
- Flap Width: 12"
- Rubber Thickness: 1/2" virgin rubber
- Tire Coverage: 11.5" from fender to bottom of flap
- Installation: No body drilling, custom fit brackets and hardware included, about 15 minutes per flap
- Made In: Canada
- Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered)