The Truck Hardware Gatorback Rubber Mud Flaps set of 4 is the clean, no-logo choice for the 2024-2027 Ford Ranger Raptor. Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is cut from heavy 1/2" thick premium rubber, mounted with custom fit brackets and hardware made for your exact truck, and backed by a lifetime warranty on the rubber. The result is a flap that hangs straight, stays put at highway speed, and keeps doing its job for the life of your truck.
These 12" wide flaps protect your truck from rocks, mud, gravel, snow, slush and road debris, so you will see your truck staying cleaner longer, less mess on your step bars, and fewer rock chips in the paint. This version is plain black rubber with no plate, a tough, understated look for owners who want serious protection without extra styling. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- Heavy-duty 1/2" thick virgin rubber - Many aftermarket flaps use thinner, recycled rubber that can curl, sag or tear over time. Gatorbacks use thick, premium virgin rubber that resists cracking and stays strong and flexible through heat, cold, rocks and gravel.
- Stays put at highway speed - The weight of the thick rubber keeps the flaps hanging straight instead of "sailing" (flapping up) in the wind, so they protect your truck at every speed.
- Custom fit, no drilling - Custom designed for the 2024-2027 Ranger Raptor, using the factory fasteners already in place, with any additional hardware you need included.
- Lifetime rubber warranty - The rubber is covered against tear-offs for the life of the product to the original owner, so you buy once and stay protected.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the 2024-2027 Ford Ranger Raptor come in several versions. Use this quick guide to make sure you pick the right one:
- Ranger Raptor only - This set is custom designed for the 2024-2027 Ranger Raptor. Standard Ranger Gatorback sets do not fit the Raptor.
- Coverage - You get 9.25" of front and 11" of rear tire coverage from the bottom of the fender to the bottom of the flap.
- Blackout builds - The black anodized and black wrap plates match other blacked-out accessories for a cohesive look.
- Plain rubber vs. plate styles - This version is plain rubber with no plate. It is also available in: black anodized Raptor logo, black wrap Raptor logo and black anodized aluminum plate.
Features and Benefits
These flaps are made from heavy-duty, 1/2" thick premium rubber that offers outstanding durability and effective protection against rocks, mud and other elements. The 12" wide flaps give you 9.25" of tire coverage up front and 11" in the rear, measured from the bottom of the fender to the bottom of the flap, effectively reducing mud splatter, rock chips and overall road grime so your truck stays cleaner longer and avoids unnecessary wear and tear.
Fit is built in. These flaps are custom designed for the 2024-2027 Ford Ranger Raptor for a perfect, seamless fit. They use the factory fasteners already in place, so no drilling into the body is needed, and they fit flush inside the wheel wells for a factory-like finish that complements the Raptor's rugged style. They work with step bars, power boards and side steps. Gatorback mud flaps are proudly made in Canada.
Installation
Installation is hassle-free with a custom fit design that requires no drilling into the truck body. The flaps use the factory fasteners already in place, and any additional hardware needed is included. Installation takes about 15 minutes per flap with common tools you already have at home, and the flaps fit flush inside the wheel wells for a factory-like finish. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (2) Gatorback Rubber front mud flaps (1 driver side, 1 passenger side)
- (2) Gatorback Rubber rear mud flaps (1 driver side, 1 passenger side)
- Custom fit mounting brackets and all required mounting hardware
Care & Maintenance
- Clean the rubber regularly with a mild soap and water solution to remove dirt, mud and grime. Regular cleaning helps keep the rubber flexible and extends the life of the flaps.
- Avoid harsh chemicals and petroleum-based cleaners, which can degrade rubber over time.
- Rinse thoroughly and let the flaps air dry for best results.
- Check the mounting hardware periodically and retighten if needed, especially after off-road or rough-road driving.
Warranty
Truck Hardware stands behind the quality of its Gatorback mud flaps with a limited lifetime warranty on the rubber portion of the flap only. This warranty covers rubber replacement (for example, tear-offs) for the lifetime of the product to the original owner, including replacement due to normal wear and tear on the rubber.
Plates, brackets and mounting hardware are not covered by the warranty, including normal wear and tear on those parts. The warranty also does not cover damage caused by misuse, abuse or improper installation. To start a warranty claim, please provide product photos and proof of purchase.
Terms to Know
- Virgin rubber - Rubber that has not been recycled or reprocessed, offering better consistency, durability, flexibility and resistance to cracking than reclaimed rubber.
- No-drill installation - Mounting that uses your vehicle's factory mounting points, so no holes are drilled and the original body and finish are preserved.
- Tire coverage - How far the flap extends below the fender, blocking road spray and debris (9.25" front; 11" rear on this set of 4).
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCR416K-BK
- Position: Set of 4 (front and rear, driver and passenger)
- Fitment: 2024-2027 Ford Ranger Raptor
- Does Not Fit: Standard Ranger (non-Raptor)
- Style: Plain black rubber, no plate
- Flap Width: 12"
- Rubber: 1/2" thick heavy-duty virgin rubber
- Tire Coverage: Front 9.25", rear 11" from fender to bottom of flap
- Installation: No body drilling, about 15 minutes per flap
- Made In: Canada
- Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered)