The Truck Hardware Gatorback Black Ford Oval Mud Flaps front pair combines serious protection with the officially licensed black Ford oval logo on a 304 stainless steel plate for 2017-2027 Ford F-450 and F-550 Super Duty trucks. Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is cut from heavy 1/2" thick virgin rubber, made specifically for the front wheels of the F-450/F-550 Super Duty, and backed by a lifetime warranty on the rubber. The result is a flap that hangs straight, stays put at highway speed, and keeps doing its job for the life of your truck.
These 12" wide flaps protect your truck from rocks, mud, gravel, snow and road debris, so you will see your truck staying cleaner longer, less junk on your step bars, and fewer rock chips in the paint. The officially licensed black Ford oval logo looks exactly right on your Super Duty. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, Ford Accessories test fits them on each model year, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- Heavy-duty 1/2" thick virgin rubber - Many aftermarket flaps use thinner, recycled rubber that can curl, sag or tear over time. Gatorbacks use thick, premium virgin rubber that stays strong and flexible for years, reducing rock chips, mud splatter and grime.
- Officially licensed black Ford oval logo - Die-stamped into a 10 1/4" x 5" 304 stainless steel plate. Licensed by Ford for authenticity and quality, and resistant to rust and corrosion.
- Custom fit, no drilling - Made for the 2017-2027 F-450/F-550 Super Duty, the flaps use the factory fasteners and mounting locations and install in about 15 minutes per flap.
- Lifetime rubber warranty - If a flap comes off the truck or is damaged from normal wear and tear, Gatorback sends replacement rubber at no charge for as long as you own the truck.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the F-450 and F-550 Super Duty come in several versions. Use this quick guide to make sure you pick the right one:
- Front pair or complete set - This listing is the front pair only (2 flaps). The F-450 uses its own front flaps, which differ from the F-250 and F-350 front flaps. For full coverage, add rear dually flaps or choose a complete F-450 set of 4.
- OEM splash guards required - These front flaps require your truck's OEM splash guards. Check that your Super Duty has them before ordering.
- Models and trims - Made for 2017-2027 F-450 and F-550 Super Duty trucks, including XL, XLT, Lariat, King Ranch, Platinum and Limited trims. Truck Hardware also lists the F-600.
- Choosing a style - This version is the black Ford oval style. This front pair is also available in: plain rubber (no plate), polished stainless steel plate, American flag, black American flag, Super Duty logo, FX4 logo, blue Ford oval, Platinum logo, black wrap FX4, black wrap Ford oval and gunmetal Ford oval.
Features and Benefits
These flaps are made from premium, heavy-duty virgin rubber, 1/2" thick, a high-quality rubber that has not been recycled and delivers lasting strength and flexibility. The weight of the thick rubber keeps the flaps from sailing at highway speed. Each flap is 12" wide and provides 12" of tire coverage from the bottom of the fender to the bottom of the flap, giving the front wheels ample coverage that keeps the sides of your truck cleaner, reduces rock chips, mud splatter and grime, and keeps road spray from affecting other drivers.
The officially licensed black Ford oval logo is die-stamped on a 304 stainless steel plate, measuring 10 1/4" x 5". Licensed by Ford, the logo ensures authenticity and quality, and the 304 stainless steel resists rust and corrosion for a long-lasting, premium appearance. You will appreciate the attention to detail in these flaps.
Fit is built in. These flaps are custom made for the 2017-2027 Ford F-450 and F-550 Super Duty, including XL, XLT, Lariat, King Ranch, Platinum and Limited trims, for precise coverage, and Ford Accessories test fits the flaps on each model year to confirm fitment. They require the truck's OEM splash guards. The flaps use your truck's existing factory fasteners and mounting locations with no body drilling, and they fit flush inside the wheel well, so they work with step bars, power boards and side steps. Gatorback mud flaps are proudly made in Canada.
Installation
Installation is simple, with no body drilling required. The flaps use your Super Duty's existing factory fasteners and mounting locations, and if there are no fasteners, the needed hardware and brackets are included for a solid installation. Note that these front flaps require the truck's OEM splash guards. Each flap takes about 15 minutes to install with tools you already have at home, and the flaps install flush to the inside of the wheel well for a clean, factory look. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (1) Gatorback Black Ford Oval front driver-side 12" wide mud flap with black Ford oval plate
- (1) Gatorback Black Ford Oval front passenger-side 12" wide mud flap with black Ford oval plate
- All necessary mounting hardware (brackets included where needed)
Care & Maintenance
- Clean the rubber regularly with a mild soap and water solution to remove dirt and road grime. Regular cleaning helps keep the rubber flexible and extends the life of the flaps.
- Avoid harsh chemicals and petroleum-based cleaners, which can degrade rubber over time.
- Rinse thoroughly and let the flaps air dry for best results.
- Clean the stainless steel plates with a mild soap and water solution. For tougher stains or minor surface corrosion, use a stainless steel cleaner made for automotive use, avoid abrasive materials, and dry the plates thoroughly to maintain their polished appearance.
- Inspect the fasteners periodically to make sure they remain secure, especially after off-road or rough-road driving.
Warranty
Gatorback mud flaps are backed by a limited lifetime warranty on the rubber portion of the flap only. This warranty covers rubber replacement (for example, tear-offs) for the lifetime of the product to the original owner. If a flap gets damaged or comes off the truck due to normal wear and tear, let us know and we will send you a replacement piece of rubber at no charge.
Plates, brackets and mounting hardware are not covered by the warranty, including regular wear on those parts. The warranty also does not cover damage caused by abuse, misuse or improper installation. To start a warranty claim, please provide product photos and proof of purchase.
Terms to Know
- Virgin rubber - High-quality rubber in its original, unrefined state, which is stronger and more durable than recycled rubber.
- No-drill installation - Mounting that uses your truck's factory fasteners and mounting locations, so no holes are drilled in the body.
- Tire coverage - How far the flap extends below the fender (12" on these front flaps). More coverage means more protection.
- OEM splash guards - The factory-installed splash guards on your Super Duty. These front flaps require them for fitment.
- Sailing - When a lightweight flap lifts and flaps at speed. The heavy 1/2" rubber keeps Gatorbacks from sailing.
- 304 stainless steel - A premium grade of stainless steel known for excellent rust and corrosion resistance, so it keeps a long-lasting, polished appearance.
- Die-stamped - The logo is pressed into the metal plate for a crisp, permanent design.
- Officially licensed - The logo is licensed by Ford, so it matches the official design.
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCR41F-2
- Position: Front pair (driver and passenger)
- Fitment: 2017-2027 Ford F-450, F-550 and F-600 Super Duty
- Trims: XL, XLT, Lariat, King Ranch, Platinum and Limited
- Requires: OEM splash guards
- Style: Officially licensed black Ford oval logo die-stamped on 304 stainless steel plates
- Plate: 304 stainless steel, 10 1/4" x 5"
- Flap Width: 12"
- Rubber: 1/2" thick heavy-duty virgin rubber
- Tire Coverage: 12" from fender to bottom of flap
- Installation: No body drilling, factory fasteners, about 15 minutes per flap
- Made In: Canada
- Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered)