The Truck Hardware Gatorback Rubber Mud Flaps set of 4 is the clean, no-logo choice for the 2025-2027 Ford Expedition King Ranch, King Ranch MAX, Platinum, Platinum MAX and Tremor, mounted on 18-gauge 304 stainless steel brackets with a 5/8" offset. Gatorback is a premium mud flap built to a higher standard than typical aftermarket splash guards, and it shows the moment you pick one up. Each flap is made from heavy 1/2" thick virgin rubber designed to flex, not crack, in extreme temperatures, mounted on 18-gauge 304 stainless steel brackets with a 5/8" offset made for your Expedition, and backed by a lifetime warranty on the rubber. Whether you are hauling kids to school, heading off-road for the weekend, towing, or cruising the highway, these flaps keep doing their job.

These 12" wide flaps protect your SUV from rocks, mud, gravel, snow, slush and road debris, so you will see your Expedition staying cleaner longer, less mess on your step bars and trailer, and fewer chips on your doors and rear bumper. The polished 304 stainless steel brackets give a clean, factory-like finish that complements the Expedition's refined look. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.

Key Features

• Heavy-duty 1/2" thick virgin rubber - Thick, dense virgin rubber resists curling, cracking and tearing in all seasons and is built to take abuse, staying flexible year-round against rocks, slush and debris.
• 5/8" offset 304 stainless steel brackets - Formed 18-gauge 304 stainless steel brackets resist corrosion, provide rigid support in extreme conditions, and add clearance for OE accessories.
• Vehicle-specific fit, no drilling - Mounts using factory holes directly over the OEM wheel well liners with all stainless hardware included, so your Expedition's body stays untouched.
• Lifetime rubber warranty - The rubber is covered for the life of the product to the original owner, so you buy once and stay protected.

Which Gatorback Is Right for Your Vehicle?

Gatorback mud flaps for the 2025-2027 Ford Expedition come in several versions. Use this quick guide to make sure you pick the right one:

• Trims that fit - This set is made for the 2025-2027 Ford Expedition King Ranch, King Ranch MAX, Platinum, Platinum MAX and Tremor. It is NOT compatible with the Expedition Active trim equipped with platform running boards.
• Black anodized vs. stainless brackets - Gatorback flaps for the new Expedition come with two bracket styles. Black anodized aluminum bracket versions give a stealthy, blacked-out look and mount directly over the OEM wheel well liners. Stainless bracket versions use formed 18-gauge 304 stainless steel brackets with a 5/8" offset for a polished look and extra clearance for side steps, power running boards and fender trim. This set uses 304 stainless steel brackets.
• Coverage - This set gives you approximately 8.75" of coverage from the bottom of the OEM protector at both the front and rear.
• Plain rubber vs. plate styles - This version is plain rubber with no plate. With stainless brackets, it is also available in: black Ford oval and polished stainless steel plate.

Features and Benefits

These mud flaps are built from high-grade, dense virgin rubber, 1/2" thick, that is flexible enough to handle extreme temperatures and resilient enough to stand up to years of daily driving. Each flap is 12" wide and gives you approximately 8.75" of front and 8.75" of rear coverage from the bottom of the OEM protector. That coverage helps prevent rocks, salt and slush from being kicked onto your lower panels, running boards, paint or trailer, especially important if you run larger wheels or aftermarket tires, and it keeps trailing vehicles cleaner and safer.

The flaps mount on formed 18-gauge 304 stainless steel brackets with a 5/8" offset. The offset lets the flaps clear wider tires and OE accessories such as factory side steps, power running boards and fender trim while still blocking debris kicked up by the tires, and the 304 stainless steel resists corrosion while providing stable, rigid support at the point of impact. The brackets are precision-formed to follow the curves of the wheel wells for a snug fit that integrates with existing body lines and OEM trim, with polished corrosion resistance that complements your Expedition's finish.

Fit is built in. Unlike universal splash guards, Gatorback flaps are engineered for a clean, flush fit that looks like it came straight from the factory. They are designed exclusively for the 2025-2027 Ford Expedition King Ranch, King Ranch MAX, Platinum, Platinum MAX and Tremor for a precise fit, and they are not compatible with the Expedition Active trim with platform running boards. The brackets mount over the existing OEM wheel well protectors; note that these flaps are not compatible with larger OEM splash guards. No cutting or drilling into the body is required, preserving your SUV's original finish. Gatorback mud flaps are proudly made in Canada.

Installation

Installation is straightforward and drill-free. The flaps use your Expedition's factory mounting points and existing fasteners along with the included stainless steel hardware, and the brackets mount over the existing OEM wheel well protectors. No cutting or body modification is required, and complete installation instructions are included. Install videos and installation instructions are available so you can see the full process step by step before you start.

What's Included

• (2) Front 12" Gatorback Rubber Mud Flaps (driver and passenger)
• (2) Rear 12" Gatorback Rubber Mud Flaps (driver and passenger)
• (2) 304 stainless steel upper mounting brackets
• All required mounting hardware
• Complete installation instructions

Care & Maintenance

• Rubber, routine cleaning: wash regularly with mild car wash soap and warm water, using a soft-bristle brush or sponge to remove mud, road salt and tar. Rinse thoroughly and dry with a microfiber towel to prevent water spots.
• Rubber, avoid harsh cleaners: petroleum-, solvent- or silicone-based products (including tire shines) can dry out or degrade the rubber and leave a greasy residue that attracts dust.
• Rubber, UV protection: in high-sunlight areas, apply a water-based rubber conditioner or UV protectant to maintain color and flexibility and prevent fading.
• Seasonal attention: clean more often in winter, on salted roads or in dusty environments to avoid buildup.
• 304 stainless steel plates and brackets: wipe with a soft microfiber cloth and a non-abrasive soap or a cleaner safe for stainless steel or chrome. Avoid bleach and acid-based cleaners, which can break down the protective chromium oxide layer.
• Polish as needed: treat mild surface rust or staining with a brass, silver or chrome polish, working in the direction of the grain. Never use steel wool, sandpaper or abrasive pads.
• Seal and protect: apply automotive wax or a synthetic sealant to guard against moisture, road grime and chloride salts.
• Avoid metal-on-metal contact: never store or mount stainless parts against plain steel or iron, which can cause galvanic corrosion.
• Inspect frequently, especially in marine, humid or winter conditions, and clean the flaps promptly after off-road driving or construction zones. Before storing the vehicle for an extended period, clean the flaps and make sure they are dry.
• Check the mounting hardware during seasonal changes and retighten if needed.

Warranty

Truck Hardware stands behind the quality of its Gatorback mud flaps with a limited lifetime warranty on the virgin rubber portion of the flap. This warranty covers the rubber against manufacturer defects and covers rubber replacement (for example, tear-offs) for the lifetime of the product under normal use by the original owner.

Plates, brackets and mounting hardware are not covered by the warranty for normal wear and tear, environmental exposure or damage from misuse or improper cleaning. To start a warranty claim, please provide product photos and proof of purchase.

Terms to Know

• Virgin rubber - High-grade rubber that has not been recycled or reprocessed, offering superior strength, elasticity, longevity and weather resistance.
• No-drill installation - A mounting process that uses factory holes or fasteners, preserving the vehicle's OEM integrity.
• Tire coverage - The vertical area covered by the flap beneath the wheel well, essential for blocking road spray and debris (approximately 8.75" front and 8.75" rear on this set).
• Offset mount - A bracket design that positions the mud flap slightly outward (5/8" here) to accommodate wider tires, fender flares or running boards.
• 304 stainless steel - A chromium-nickel alloy known for its excellent corrosion resistance and longevity in automotive and marine applications.
• OEM protector - The original factory-installed wheel well liner that guides installation and offers baseline protection.

Specs at a Glance

• Brand: Truck Hardware Gatorback
• Part Number: GCS418K-BK
• Position: Set of 4 (front and rear, driver and passenger)
• Fitment: 2025-2027 Ford Expedition
• Trims: King Ranch, King Ranch MAX, Platinum, Platinum MAX and Tremor
• Does Not Fit: Expedition Active with platform running boards; larger OEM splash guards
• Style: Plain black rubber, no plate
• Brackets: Formed 18-gauge 304 stainless steel, 5/8" offset
• Flap Width: 12"
• Rubber: 1/2" thick heavy-duty virgin rubber
• Tire Coverage: Front approximately 8.75", rear approximately 8.75" (bottom of the OEM protector)
• Installation: No drilling, factory mounting points, stainless hardware included
• Made In: Canada
• Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered for wear)