The Truck Hardware Gatorback Stainless Plate Mud Flaps set of 4 combines serious protection with a polished stainless steel plate for 2024-2027 Ford Ranger trucks (excluding Raptor). Gatorback is a premium mud flap built to a higher standard than typical aftermarket flaps, and it shows the moment you pick one up. Each flap is cut from heavy 1/2" thick premium rubber, mounted with custom fit brackets and hardware made for your exact truck, and backed by a lifetime warranty on the rubber. Each flap weighs 5 lbs, so no rocks or debris get past it. The result is a flap that hangs straight, stays put at highway speed, and keeps doing its job for the life of your truck.
These 12" wide flaps protect your truck from rocks, mud, gravel, snow, slush and road debris, so you will see your truck staying cleaner longer, less mess on your step bars, and fewer rock chips in the paint. The polished stainless steel plate adds a classic, refined look that stays bright and resists rust. Gatorback flaps are some of the highest quality, heaviest duty mud guards in the industry, and they are proudly made in Canada. If you are looking for mud flaps you buy once and never think about again, this is them.
Key Features
- 5 lbs of 1/2" thick heavy-duty rubber per flap - Thick, heavy premium rubber resists curling, sagging and tearing, so no rocks or debris get past it and the flaps stay put at highway speed.
- Formed stainless steel plates - Polished stainless steel plates that are embossed and formed for added strength and an upscale look.
- Custom fit, no drilling - Custom fit brackets and hardware for the 2024-2027 Ranger use the factory screws already in place, so no holes are drilled in your truck.
- Lifetime rubber warranty - The rubber is covered against tear-offs for the life of the product to the original owner, so you buy once and stay protected.
Which Gatorback Is Right for Your Truck?
Gatorback mud flaps for the 2024-2027 Ford Ranger come in several versions. Use this quick guide to make sure you pick the right one:
- Ranger vs. Ranger Raptor - This set fits the 2024-2027 Ranger and does NOT fit the Ranger Raptor. Raptor owners should choose the Gatorback Ranger Raptor set.
- Trims - Truck Hardware lists fitment for the XL, XLT and Lariat trims.
- Plate finishes - Choose from black anodized, gunmetal, black wrap, or polished stainless with the officially licensed Ranger logo, a plain stainless plate, or plain rubber.
- Choosing a style - This version is the polished stainless steel plate style. It is also available in: black anodized Ranger logo, gunmetal Ranger logo, black wrap Ranger logo, polished stainless Ranger logo and plain rubber (no plate).
Features and Benefits
These flaps are made from heavy-duty, 1/2" thick premium rubber that offers outstanding durability and effective protection against rocks, mud and other elements. Each flap weighs 5 lbs, so no rocks or debris get past it. The 12" wide flaps give you 10" of tire coverage up front and 10" in the rear, measured from the bottom of the fender to the bottom of the flap, effectively reducing mud splatter, rock chips and overall road grime so your truck stays cleaner longer and avoids unnecessary wear and tear.
Each flap carries a polished stainless steel plate that is embossed and formed for additional durability, a stylish yet functional upgrade with an upscale look. Each plate measures 10 1/4" x 5". You will appreciate the attention to detail in these flaps.
Fit is built in. These flaps are custom designed for 2024-2027 Ford Ranger trucks (XL, XLT and Lariat trims) and do not fit Raptor models. Custom fit brackets and hardware use the factory screws already in place, and the flaps fit seamlessly into the wheel wells for a flush, factory-like finish. Manufactured in Canada by Truck Hardware with precision engineering, they carry a Ford-approved, officially licensed design.
Installation
Installation is simple with custom fit hardware and brackets, and no body drilling is required. The flaps use the factory screws already in place for a secure, straightforward installation that takes only about 5 minutes per flap with basic tools, and they fit flush in the wheel wells for a factory-like finish. Install videos and installation instructions are available so you can see the full process step by step before you start.
What's Included
- (2) Gatorback Stainless Plate front mud flaps (1 driver side, 1 passenger side)
- (2) Gatorback Stainless Plate rear mud flaps (1 driver side, 1 passenger side)
- Custom fit mounting brackets and all required mounting hardware
Care & Maintenance
- Clean the rubber regularly with a mild soap and water solution to remove dirt, mud and grime. Regular cleaning helps keep the rubber flexible and extends the life of the flaps.
- Avoid harsh chemicals and petroleum-based cleaners, which can degrade rubber over time.
- Rinse thoroughly and let the flaps air dry for best results.
- Clean the stainless steel plates with a soft cloth and a stainless steel cleaner, or a mild soap and water solution, to maintain their polished appearance. For tougher stains or minor surface corrosion, use a stainless steel cleaner made for automotive use. Avoid abrasive materials that could scratch the surface or damage the finish, and dry the plates thoroughly to prevent water spots.
- Check the mounting hardware periodically and retighten if needed, especially after off-road or rough-road driving.
Warranty
Truck Hardware stands behind the quality of its Gatorback mud flaps with a limited lifetime warranty on the rubber portion of the flap only. This warranty covers rubber replacement (for example, tear-offs) for the lifetime of the product to the original owner, including replacement due to normal wear and tear on the rubber.
Plates, brackets and mounting hardware are not covered by the warranty, including normal wear and tear on those parts. The warranty also does not cover damage caused by misuse, abuse or improper installation. To start a warranty claim, please provide product photos and proof of purchase.
Terms to Know
- Virgin rubber - Rubber that has not been recycled or reprocessed, offering better consistency, durability, flexibility and resistance to cracking than reclaimed rubber.
- No-drill installation - Mounting that uses your vehicle's factory mounting points, so no holes are drilled and the original body and finish are preserved.
- Tire coverage - How far the flap extends below the fender, blocking road spray and debris (10" front; 10" rear on this set of 4).
- 304 stainless steel - A premium grade of stainless steel known for excellent rust and corrosion resistance, ensuring a durable, long-lasting finish.
- Formed plate - A stainless steel plate shaped to enhance the strength and visual appeal of the mud flaps.
Other Helpful Topics
Specs at a Glance
- Brand: Truck Hardware Gatorback
- Part Number: GCR414K-SS
- Position: Set of 4 (front and rear, driver and passenger)
- Fitment: 2024-2027 Ford Ranger
- Trims: XL, XLT and Lariat
- Does Not Fit: Ranger Raptor
- Style: Polished stainless steel plates, embossed and formed for strength
- Plate: Stainless steel, 10 1/4" x 5"
- Flap Width: 12"
- Rubber: 1/2" thick heavy-duty virgin rubber, 5 lbs per flap
- Tire Coverage: Front 10", rear 10" from fender to bottom of flap
- Installation: No body drilling, about 5 minutes per flap
- Made In: Canada
- Warranty: Limited lifetime, rubber only (plates, brackets and hardware not covered)